BACK TO PRODUCTS

All Products

Filter by

Products

40 Product Found
My Filters
    Primer
    Intergard 361
    A two pack, low temperature cure, epoxy universal primer which can be overcoated with various finish coats such as polyurethane, epoxy and alkyd finishes after extended periods, without the use of a tie coat. It is also used as a primer over galvanised steel and stainless steel.
    Primer-Finish
    Intergard 452
    Intergard 452 is a two component, high build epoxy intermediate. Pigmented with micaceous iron oxide to comply with the requirements of BS5493:1977
    Primer-Finish
    Intergard 563
    A high solids, high build, two component epoxy primer, intermediate or finish, not containing low molecular weight epoxy resins.
    Primer-Finish
    Intergard 343
    A high volume solids, light coloured, aluminium pure epoxy universal primer with good corrosion and abrasion resistance. Suitable for application at low temperatures.
    Primer
    Intergard 2510
    A two component epoxy anti-corrosive primer pigmented with zinc phosphate.
    Finish
    Intergard 435
    A high solids two-pack epoxy finish specifically designed for concrete flooring.

    Tough, long wearing and abrasion resistant. Resists scuffing and marring.

    Excellent resistance to most alkalis, solvents, mild acids and water. Excellent brush and roller application characteristics. May be applied to damp concrete.
    Intermediate
    Intergard 400
    A high build, two component epoxy, pigmented with lamellar micaceous iron oxide for enhanced corrosion resistance and improved overcoating properties after ageing.
    Primer-Finish
    Intergard 3500
    Designed for use in the rail industry as a one coat direct-to-metal exterior finish or a primer for approved topcoats; Intergard 3500 has excellent edge retentive properties and provides a combination of anti-corrosive barrier protection and abrasion, chemical fume and spillage resistance. Intergard 3500 is formulated with ultra high solids, providing an option where regulations or customer preference require low VOCs and zero HAPs coatings
    Primer-Finish
    Intergard 7562
    A low VOC, two component, internally flexibilised, high build, surface tolerant epoxy primer. Pigmented with aluminium for increased corrosion resistance. HAPs free.
    Primer-Finish
    Intergard 966
    A high build, high performance, two component epoxy intermediate or finish with excellent chemical and abrasion resistance. Available with conventional pigmentation or alternatively, pigmented with micaceous iron oxide to provide enhanced overcoating properties.
    Primer
    Intergard 276
    A quick drying two component epoxy primer.Suitable for overcoating after prolonged periods of weathering.
    Filler
    Intergard 821
    Primer
    Intergard 2575
    A two component, high solids, low VOC, fast-curing epoxy zinc phosphate/micaceous iron oxide primer offering excellent barrier protection. Suitable for overcoating within 2 hours under common climatic conditions. Early handling properties make this an ideal primer for speeding up production and throughput.
    Primer-Finish
    Intergard 264
    A low VOC, two component, self-priming surface tolerant epoxy with semi-gloss finish. Exhibits excellent chemical and abrasion resistance. The high build formulation is capable of low temperature cure
    Primer
    Intergard 2511
    A two component, low VOC, high solids, epoxy primer containing zinc phosphate anti-corrosive pigmentation.This primer's versatile application properties provide robust film thickness control as supplied, without the need to thin.
    1. 1

    Sorry, we couldn't find any results
    Fetching the data, please wait...