BACK TO PRODUCTS

All Products

Filter by

Products

29 Product Found
My Filters
    Primer
    Intergard 361
    A two pack, low temperature cure, epoxy universal primer which can be overcoated with various finish coats such as polyurethane, epoxy and alkyd finishes after extended periods, without the use of a tie coat. It is also used as a primer over galvanised steel and stainless steel.
    Primer-Finish
    Intergard 452
    Intergard 452 is a two component, high build epoxy intermediate. Pigmented with micaceous iron oxide to comply with the requirements of BS5493:1977
    Pipe Lining
    Intergard 2272
    A low VOC, two component, high solids epoxy anti-corrosive flow coat.
    Primer-Finish
    Intergard 343
    A high volume solids, light coloured, aluminium pure epoxy universal primer with good corrosion and abrasion resistance. Suitable for application at low temperatures.
    Primer-Finish
    Intergard 3500
    Designed for use in the rail industry as a one coat direct-to-metal exterior finish or a primer for approved topcoats; Intergard 3500 has excellent edge retentive properties and provides a combination of anti-corrosive barrier protection and abrasion, chemical fume and spillage resistance. Intergard 3500 is formulated with ultra high solids, providing an option where regulations or customer preference require low VOCs and zero HAPs coatings
    Primer-Finish
    Intergard 966
    A high build, high performance, two component epoxy intermediate or finish with excellent chemical and abrasion resistance. Available with conventional pigmentation or alternatively, pigmented with micaceous iron oxide to provide enhanced overcoating properties.
    Primer
    Intergard 1032
    A two component epoxy anti-corrosive primer pigmented with zinc phosphate.
    Primer
    Intergard 436
    A two component clear epoxy sealer.Can be applied to slightly damp concrete. Cures quickly, long pot life. Excellent resistance to most alkalis, solvents, mild acids and water. Good toughness and resilience. Excellent binding properties to weathered fibrous cement sheeting.
    Intermediate
    Intergard 475HS
    Intergard 475HS is a low VOC, high solids, high build epoxy used to improve barrier protection for a range of anticorrosive coating systems in a wide range of aggressive environments. Intergard 475HS can be pigmented with MIO to provide improved overcoating properties, better facilitating application in the fabrication shop.
    Primer
    Intergard 2511
    A two component, low VOC, high solids, epoxy primer containing zinc phosphate anti-corrosive pigmentation.This primer's versatile application properties provide robust film thickness control as supplied, without the need to thin.
    Concrete Repair
    Intergard 2002
    A two-component, high solids and high build polyamine-cured epoxy.
    Primer
    Intergard 291
    A two component epoxy anti-corrosive primer.
    Primer-Finish
    Intergard 345
    Intergard 345 is a versatile, low VOC, high solids, zinc phosphate direct-to-metal epoxy. Suitable for use as a one or two coat new construction primer-finish coating or as an intermediate over recommended anticorrosive primers. Intergard 345 offers excellent anticorrosive performance with rapid drying time and excellent early abrasion resistance resulting in high steel throughput and increased productivity.
    Primer
    Intergard 235
    A high build, high solids, low VOC two component epoxy primer.
    Primer
    Intergard 251
    The fast drying and handling properties of Intergard 251 coupled with extended overcoatability make this an excellent primer for factory application prior to full system application on site. Intergard 251 is a two component anticorrosive zinc phosphate epoxy primer for use in both new construction and industrial maintenance for a wide range of anti-corrosive coatings systems.
    1. 1

    Sorry, we couldn't find any results
    Fetching the data, please wait...