Primer-Finish
Intergard 452
Intergard 452 is a two component, high build epoxy intermediate. Pigmented with micaceous iron oxide to comply with the requirements of BS5493:1977
Filter by
Products
My Filters
Primer-Finish
Interbuild 1094
Interbuild 1094 is a pigmented, solvent free, self-smoothing, Epoxy overlay system designed to provide seamless protection of Concrete substrates from 0.5mm to 1mm. Interbuild 1094 will provide a gloss finish with excellent wear characteristics and abrasion resistance, high levels of chemical resistance and an easy to clean smooth finish.
Primer-Finish
Interzone 9545
A two component, ultra-low VOC, fast curing, hybrid epoxy technology. As a heavy duty epoxy barrier coating formulated for single leg airless spray application Interzone 9545 is designed to provide long term corrosion protection in aggressive offshore environments. Approved to Norsok M-501 System 7A and 7B Interzone 9545 shows excellent corrosion resistance to abrasion and cathodic disbondment.
Primer-Finish
Intergard 343
A high volume solids, light coloured, aluminium pure epoxy universal primer with good corrosion and abrasion resistance. Suitable for application at low temperatures.
Primer-Finish
Devcryl 1440
A low VOC, single component, rust inhibitive water borne acrylic for use as a primer or finish applied directly to properly prepared metal, concrete or wood surfaces. *Please note this product is only available in North America.
Primer-Finish
Intergard 3500
Designed for use in the rail industry as a one coat direct-to-metal exterior finish or a primer for approved topcoats; Intergard 3500 has excellent edge retentive properties and provides a combination of anti-corrosive barrier protection and abrasion, chemical fume and spillage resistance. Intergard 3500 is formulated with ultra high solids, providing an option where regulations or customer preference require low VOCs and zero HAPs coatings
Primer-Finish
Devthane 359H
A high performance, low VOC, two-component chemically-cured aliphatic urethane gloss finish. *Please note this product is only available in North America.
Primer-Finish
Devthane 359
A high build, high performance, two-component chemically-cured aliphatic urethane gloss finish. *Please note this product is only available in North America.
Primer-Finish
Interbuild 1073
Interbuild 1073 is a two component, high solids content epoxy primer typically used in maintenance environments due to excellent surface tolerance properties. With a low VOC content, the primer can also be applied within internal environments and complies with the Indoor air quality standard as stipulated by EPA Method 24.
Primer-Finish
Devtar 5A-HS
A high performance, two-component, coal-tar free, chemically-cured high-build epoxy coating. *Please note this product is only available in North America.
Primer-Finish
Intergard 966
A high build, high performance, two component epoxy intermediate or finish with excellent chemical and abrasion resistance. Available with conventional pigmentation or alternatively, pigmented with micaceous iron oxide to provide enhanced overcoating properties.
Primer-Finish
Devthane 389N
A high performance, two-component chemically-cured aliphatic urethane gloss finish. *Please note this product is only available in North America.
Primer-Finish
Bar-Rust 231LV
An ultra low VOC, high performance, multi-purpose, surface tolerant, two-component chemically-cured epoxy semi-gloss coating.
Primer-Finish
Interdur 8844
A low VOC, two component high build, high solids, epoxy immersion coating. Designed to give long term protection in a single coat for immersion service situations. A winter curing agent is available to assist faster turn around times in cold conditions. CHINA ONLY
Primer-Finish
RELEST Wind Adhesion Promoter - I367-0080
RELEST Wind Adhesion Promoter is a two component polyurethane material designed to ensure optimal adhesion for PVC, aluminium cast, CDC, PMAA and GRP based on epoxy or polyester. It is is especially suited for use in combination with wear protection coatings for rotor blades.