Structural Concrete: Repair and Protection

Speciality Coating

Filter by

Product Chemistry

Volume Solids

VOC(EPA Solvent)

Gloss Level

Number of Components

Attributes

Water and Waste

Mining

Transportation and Pipeline

Buildings

Wind Power

Thermal Power

Onshore Oil and Gas facilities

Product Line

Range

Low temperature Cure (5 Celsius)

Structural Repair

45 Products

Intercrete 4871 (formerly Steel Reinforcement Protector 841)

Product Type
Structural Concrete: Repair and Protection
Chemistry
Steel Reinforcement Protection

A two component, water based, polymer modified cementitious anti-corrosive coating. *Selective Countries Only - Please contact your local representative.

Intercrete 4873 (formerly Cemprotec GE080)

Product Type
Structural Concrete: Repair and Protection
Chemistry
No translation found - Mat Fibre Reinforcement - eng

Specifically designed as a general reinforcement for elastomeric cementitious coatings such as Intercrete 4842, particularly on roofs or other areas of cracked concrete where further movement is possible. It provides additional toughness to the film whilst still maintaining a high degree of flexibility

Intercrete 4874 (formerly Cemprotec 2000-BJT)

Product Type
Structural Concrete: Repair and Protection
Chemistry
Flexible Waterproof Sealing Tape

Supplied as a 100mm wide preformed strip on siliconised release paper, the backing strip is simply removed upon application. Non-toxic and approved for use in contact with potable water, Intercrete 4874 is ideal for use in a wide range of waterproofing applications, such as reservoirs, water tanks, roof slab and projects in enclosed locations where it is not suitable to use solvent-based or hot welded products

Intercrete 4875 (formerly Cemprotec Scrim)

Product Type
Structural Concrete: Repair and Protection
Chemistry
Flexible Waterproof Sealing Tape

Supplied in two grades for the reinforcement of the Flexcrete range of cementitious mortars and coatings: INTERCRETE SCRIM: Particularly suited for general reinforcement over large areas of cracking/crazing or weak/friable substrates, particularly insulation, to provide increased tensile strength and impact resistance. INTERCRETE EDGE SCRIM: For localised reinforcement over joints or cracks to provide increased tensile strength. Can also be used over welds or edges of steel sections to help maintain correct film thickness. Self-adhesive.

Intercrete 4876 (formerly Cemprotec GFM 100 / GFM 225)

Product Type
Structural Concrete: Repair and Protection
Chemistry
No translation found - Mat Fibre Reinforcement - eng

Supplied in two grades for the reinforcement of the Intercrete range of fluid applied membranes. It is particularly suited for the reinforcement of Intercrete 4845 used in pitched and flat roof waterproofing where it greatly enhances tensile strength and tear resistance to increase cohesive strength of the composite membrane to accommodate cracks in roofing substrates. It is also used to reinforce membranes in situations where a multi-crazed or cracked substrate must be treated, or where there is a need to provide an additional defence against mechanical damage in high traffic environments.

Intercrete 4878 (formerly Cemprotec Flex-Tape)

Product Type
Structural Concrete: Repair and Protection
Chemistry
Flexible Waterproof Sealing Tape

Specially designed for easy embedment in the Intercrete range of decorative protective coatings to ensure continuity of a seamless finish over cracks or joints, and at junctions between dissimilar substrates. Available in two grades, the Light Duty grade may be used to cover static cracks and joints, whereas for larger cracks and joints which are subject to movement, Heavy Duty grade is recommended. By introducing Intercrete 4878 into the applied membrane, a fully waterproof and permanently flexible finish is assured. Intercrete 4878 is non-degrading and is suitable for both internal and external applications.

Intercrete 4879 (formerly Cemprotec MCI 2020)

Product Type
Structural Concrete: Repair and Protection
Chemistry
Migratory Corrosion Inhibitor

Specifically designed to protect embedded steel reinforcement in concrete structures. It should be used as part of the Intercrete Concrete Repair and Protection System where additional protection is required, particularly from the effects of chloride attack. Intercrete 4879 migrates into even the hardest concrete towards steel reinforcement, where it forms a monomolecular protective layer which helps to reduce corrosion at both the anode and cathode. Helps to extend the life of reinforced concrete structures in aggressive environments.

Intercrete 4880 (formerly Biodex HB Series 2)

Product Type
Structural Concrete: Repair and Protection
Chemistry
Water Based Acrylic

Designed as a vapour permeable membrane which can be reinforced to impart increased tensile strength for crazed surfaces or to resist mechanical damage. Intercrete 4880 benefits from the latest dual action mechanism to protect against the growth of micro-organisms and to provide added protection from germs. Intercrete 4880 has a safe, non-leaching biostatic formulation ideally suited for a range of hygiene sensitive locations. It is applied to walls and ceilings to prevent the growth of mould and bacteria in food preparation or production areas, brewing and beverage industries, hospitals, the pharmaceutical industry and in kitchens and bathrooms. CE-Marked in accordance with BS EN 1504-2. Suitable for surface protection systems principles 2.2, 8.2 as defined in BS EN 1504 Part 2.

Intercrete 4881 (formerly Biodex Sheen Series 2)

Product Type
Structural Concrete: Repair and Protection
Chemistry
Water Based Acrylic

Designed as a vapour permeable membrane which can be reinforced to impart increased tensile strength for crazed surfaces or to resist mechanical damage. Intercrete 4881 benefits from the latest dual action mechanism to protect against the growth of micro-organisms and to provide added protection from germs. Intercrete 4881 has is a safe, non-leaching biostatic formulation suitable for walls and ceilings in all industries where strict standards of hygiene are observed. It is applied to walls and ceilings to prevent the growth of mould and bacteria in food preparation or production areas, brewing and beverage industries, hospitals, the pharmaceutical industry and in kitchens and bathrooms. CE-Marked in accordance with BS EN 1504 -2. Suitable for surface protection systems principles 2.2, 8.2 as defined in BS EN 1504-2.

Intercrete 4890 (formerly Monodex Ultra Series 2)

Product Type
Structural Concrete: Repair and Protection
Chemistry
Water Based Acrylic

Intercrete 4890 is a single pack, low VOC, water-based, modified styrene acrylic copolymer decorative concrete coating that provides excellent protection against carbonation and water ingress without entrapping moisture within damp substrates. Elastomeric properties enable the system to accommodate hairline cracks and substrate movement while providing lasting protection. Adhesion is excellent to mineral substrates.

Pages