Mining

Product Applications

With an extensive track record, our coatings are proven to extend the design life of the production facilities and improve cash flow due to less downtime.

Filter by

Products

213 Product Found
My Filters
    Lining
    Interline 975P
    A two component, solvent free, heavy duty epoxy tank lining.
    Primer
    Intergard 1032
    A two component epoxy anti-corrosive primer pigmented with zinc phosphate.
    Primer
    Interdur 8805
    A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer. Conforms to SSPC Paint 20 Level 3. Available in ASTM D520, Type II zinc dust version as standard.
    Structural Concrete- Repair and Protection
    Intercrete 4804 (formerly Marine Mortar S)
    A two component, water-based (VOC-free), fibre reinforced, polymer modified, cementitious mortar with excellent adhesion for use in areas subject to early immersion. Intercrete 4804 cures rapidly to produce a high strength mortar with enhanced polymeric properties for the repair of voids in aggressive marine environments. Suitable for thicknesses up to 50mm.
    Temperature Resistance
    Intertherm 50
    A single component, high temperature coating based on a moisture-curing silicone binder, Intertherm 50 is ideal for the protection of steel from corrosion at temperatures up to 540°C (1004°F). The moisture-curing crosslinking technology of Intertherm 50 allows multiple coats to be applied without heat curing.
    Intermediate
    Intergard 475HS
    Intergard 475HS is a low VOC, high solids, high build epoxy used to improve barrier protection for a range of anticorrosive coating systems in a wide range of aggressive environments. Intergard 475HS can be pigmented with MIO to provide improved overcoating properties, better facilitating application in the fabrication shop.
    Temperature Resistance
    Intertherm 228HS
    A highly crosslinked, two component, high build epoxy phenolic coating, Intertherm 228HS combines properties of corrosion and chemical resistance when used in high temperature service. Based upon novolac resin technology, Intertherm 228HS can be used in a wide range of highly corrosive environments operating at temperatures up to 230°C (446°F).
    Intermediate
    Interdur 8842
    A two component, high solids, low VOC epoxy micaceous iron oxide coating formulated on proprietary polymer technology which provides rapid cure and overcoating even under low temperature conditions.
    Other
    Enviroline 405HTR MR System
    Enviroline 405HTR MR is a reinforced chemcial resistant system. The system features a high temperature reesistant, 100% volume high solids, two component polycyclamine cured lining topcoat. Fibre glass mat reinforcement increases physical properties and where necessary allows dynamic crack bridging in concrete.In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
    Primer-Finish
    Intercure 3240G
    A two component, gloss, low VOC, high solids, fast drying polyaspartic primer/finish coating. Intercure 3240G provides improved productivity at ambient temperature application whilst combining the anti-corrosive performance of epoxy coatings and high aesthetics of UV durable topcoats in a single coat application. Intercure 3240G is applied as a single coat direct to correctly prepared substrates using manual mix (single leg) or automatic mix (plural leg) application equipment, reducing application time, energy consumption and labour costs when compared to two coat applications, or single coat applications which require force drying at high temperature.
    Structural Concrete- Repair and Protection
    Intercrete 4811 (formerly Bond-Prime)
    A single component, water-based (VOC free), rapid curing, acrylic copolymer modified with a unique water-emulsified epoxy cross-linking agent. Intercrete 4811 is inherently hydrophobic and alkali resistant, making it ideal for application to a wide range of new and aged mineral substrates.
    It is non-hazardous, and application is by brush, roller or airless spray to prime and stabilise surfaces prior to the application of Flexcrete’s specialist membranes. Intercrete 4811 cures to form a clear film with an identifying green tint, both on and within the substrate, to provide an ideal surface for subsequent treatment.
    Finish
    Devthane 379N
    A low VOC, two component modified acrylic polyurethane finish giving excellent durability and long-term
    recoatability, for use over correctly prepared primed surfaces. This product is also HAPS free and
    exempt solvent free.
    Primer
    Intergard 291
    A two component epoxy anti-corrosive primer.
    Surface Tolerant
    Interbond 998PB
    A solvent free, two component, high build, surface tolerant epoxy coating capable of being applied as a single or multi-coat system over abrasive blasted, hydroblasted or mechanically prepared steel surfaces.
    Subsea, Abrasion Resistant and Splashzone
    Interzone 101
    A two component, solvent free epoxy which can be applied underwater and will cure underwater to give a corrosion and abrasion resistant coating.
    Fetching the data, please wait...