BACK TO PRODUCTS

Thermal Power

Product Applications

We offer a wide range of high performance coatings that provide long term corrosion protection and aesthetics

CASES

Optimized Capacity with Interline 984

Filter by

Products

277 Product Found
My Filters
    Structural Concrete- Repair and Protection
    Intercrete 4804 (formerly Marine Mortar S)
    A two component, water-based (VOC-free), fibre reinforced, polymer modified, cementitious mortar with excellent adhesion for use in areas subject to early immersion. Intercrete 4804 cures rapidly to produce a high strength mortar with enhanced polymeric properties for the repair of voids in aggressive marine environments. Suitable for thicknesses up to 50mm.
    Structural Concrete- Repair and Protection
    Intercrete 4807 (formerly Ttiefill)
    A single component, water-based (VOC free), polymer modified, fibre reinforced, Portland cement based repair compound which exhibits unique hydraulic properties to produce a rapid setting curing mortar with enhanced polymer properties.
    Intercrete 4807 is ideally suited for the filling of voids, particularly in new construction, which needs to be rapidly put into service, such as tieholes, grout holes and voids around fixings.
    Structural Concrete- Repair and Protection
    Intercrete 4805 (formerly Monopour)
    A single component, water-based (VOC free), high performance, polymer modified, non-shrink cementitious formulation. Intercrete 4805 is a flowing grout with a maximum aggregate size of 2.5mm for application thicknesses up to 100mm.
    Structural Concrete- Repair and Protection
    Intercrete 4853 (formerly Cemprotec Levelling Coat)
    A two component epoxy and polymer modified cementitious coating / wearing screed for levelling and waterproofing concrete substrates. It incorporates advanced cement chemistry, metakaolin, fibre, epoxy and styrene acrylic copolymer technology to give enhanced performance and excellent adhesion to concrete surfaces. When mixed, it exhibits a degree of flow to enable ease of application by pouring or pumping techniques to give an even finish. It hydrates to form a dense screed, which exhibits both polymeric and resinous properties giving low permeability to water and ensuring long term performance. It is specially formulated to harden rapidly to form a durable surface, which can typically be overcoated within 24 hours.
    Structural Concrete- Repair and Protection
    Intercrete 4843
    Structural Concrete- Repair and Protection
    Intercrete 4800 (formerly Monomix WS)
    A single component, water-based (VOC-free), polymer modified, fibre reinforced, low density cementitious repair mortar. The thixotropic nature of the product enables easy high build hand and trowel application for the structural repair of voids and the rendering and re-profiling of vertical, horizontal and overhead surfaces. Intercrete 4800 is supplied as a single pack system requiring only the addition of clean water.
    Structural Concrete- Repair and Protection
    Intercrete 4814 (formerly Monosil)
    A single component, water-based (VOC free), mixture of silane, siloxane and synthetic resins which imparts maximum water and oil repellency to mineral substrates. It penetrates the surface pores to minimise its effect on the appearance of the substrate and has minimal effect on the water vapour diffusion characteristics.
    Other
    Interplus 4102 Odin Gel
    A single component, water-based rust remover / cleaner gel. Interplus 4102 Odin Gel is 100% biologically degradable, free for toxins and conforms to the yellow classification of the Harmonised Offshore Chemical Notification Format (HOCNF).
    Primer-Finish
    Interzone 9545
    A two component, ultra-low VOC, fast curing, hybrid epoxy technology. As a heavy duty epoxy barrier coating formulated for single leg airless spray application Interzone 9545 is designed to provide long term corrosion protection in aggressive offshore environments. Approved to Norsok M-501 System 7A and 7B Interzone 9545 shows excellent corrosion resistance to abrasion and cathodic disbondment.
    Structural Concrete- Repair and Protection
    Intercrete 4812 (formerly Bonding Bridge 842)
    A single component, water-based (VOC free), advanced, polymer modified, cementitious surface impregnant with high penetration into concrete.
    Structural Concrete- Repair and Protection
    Intercrete 4822 (formerly Monolevel FC)
    A single component, water-based (VOC-free), polymer modified, fibre reinforced cementitious repair mortar with high adhesive properties, allowing it to be used as a thin screed or filler to provide a fair-faced finish. It cures to provide enhanced freeze/thaw resistance and protection from the ingress of water, acid gases and chlorides. It is supplied as a single component system requiring only the addition of clean water.
    Structural Concrete- Repair and Protection
    Intercrete 4825 (formerly Monorub)
    A single component, water-based (VOC-free), polymer modified cementitious mortar for the filling of blow-holes and small surface defects in precast and in-situ concrete, whilst providing an aesthetic yet durable finish. The incorporation of a polymer enhances adhesion and imparts a high degree of water repellency to the surface of concrete, making it denser and more impermeable. Once cured, if required it can be overcoated with specialist membranes in the Flexcrete range to provide further protection and aesthetic quality.
    Temperature Resistance
    Intertherm 2205
    Intertherm 2205 is a specialist temperature resistant maintenance coating, designed to resist corrosion under insulation (CUI) and high temperatures up to 230°C (446°F). Based on innovative, hot spread epoxy technology Intertherm 2205 shows excellent application characteristics and can be brush applied to hand prepared, hot steel up to 205°C (401°F).
    Structural Concrete- Repair and Protection
    Intercrete 4844 (formerly Cemprotec Clutch Filler)
    A two component, water based, epoxy and cementitious modified polymer mortar for sealing the interlock or clutch between sheet piles. It incorporates advanced cement chemistry, microsilica, fibre, epoxy and styrene acrylic copolymer technology to provide multi-functional protection with enhanced chemical resistance. When mixed, it can be applied with a pointing gun exhibiting a high degree of thixotropy to enable ease of application and filling of the void without sagging. It is specially formulated to chemically accelerate the passivation of ferrous metals even in the presence of chlorides and give maximum adhesion to steel.
    Structural Concrete- Repair and Protection
    Intercrete 4813 (formerly Metal-Prime WB)
    A single component, water-based (VOC free), epoxy and acrylic-based anti-corrosion primer. Intercrete 4813 is a phosphate free formulation which forms a distinctive oxide red film upon application, ensuring even coverage of the substrate.
    Extremely effective at preventing flash rusting and rust creep around holidays or areas of damage.
    1. 1

    Sorry, we couldn't find any results
    Fetching the data, please wait...