We offer a wide range of high performance coatings that provide long term corrosion protection and aesthetics
A high solids, abrasion resistant, aluminum pigmented pure epoxy coating, Intershield 300HS provides excellent long term anticorrosive protection and low temperature cure capability. Intershield 300HS is a universal primer that can also be used as a ballast tank coating
Interchar 1190 is a single component, low VOC waterborne intumescent coating designed for onsite application. Tested and approved to the highest standards, thin film Interchar 1190 provides up to two hours fire protection to interior exposed structural steel, while maintaining architectural aesthetics.
Ceilcote 282HB Flakeline has excellent resistance to hot flue gas environments. The coating system can achieve a dry film thickness of up to 1350 microns (54 mils) in a single coat with or without the use of a primer. The intent is to eliminate one applic ation step where similar coating systems require two seperate applications. Ceilcote 282HB Flakeline is normally applied on metal surfaces with proper surface preparation. Uses Ceilcote #2 Hardener.
A highly crosslinked, two component, high build epoxy phenolic coating, Intertherm 228HS combines properties of corrosion and chemical resistance when used in high temperature service. Based upon novolac resin technology, Intertherm 228HS can be used in a wide range of highly corrosive environments operating at temperatures up to 230°C (446°F).
A tough, hard wearing, two component, acrylic polysiloxane finish, Interfine 2080 is suitable for both new construction and site maintenance application situations. Interfine 2080 is ideal for areas where high standards of cosmetic appearance and aesthetics are a key requirement, offering superior gloss and color retention and excellent abrasion resistance.
A low VOC, two component modified acrylic polyurethane finish giving excellent durability and long-term recoatability, for use over correctly prepared primed surfaces. This product is also HAPS free and exempt solvent free.International Paint also offers Interthane 990V in a mildew resistant, bright white finish. Contact your International Paint representative for additional information.
Interkote 1560 is a cementitious passive fire protection (PFP) coating, ideally suited for onshore facilities where onsite application of cement-based PFP is preferred. Formulated with bauxite, it provides durable, cost-effective fire resistance in accordance with the UL 1709 standard
A two component, low VOC, high solids, fast curing anticorrosive epoxy primer pigmented with zinc phosphate. CHINA ONLY
Interdur 8814 is a high performance, multi-purpose, surface tolerant, two-component chemicallycured epoxy semi-gloss coating. CHINA ONLY
Intercure 99 is a high durability, two component, low VOC polyaspartic direct-to-metal primer/finish offering excellent anticorrosive protection and long term color and gloss durability. Intercure 99 is applied as a single coat, high performance finish reducing application time and labor costs, while rapid cure maximizes fabrication throughput.
Protecting wind turbines from tip-to-toe
Corrosion & fire protection coatings for buildings