Finish
Devgrip 238
Devgrip 238 is a two component, abrasion resistant epoxy coating. *Please note this product is only available in North America.
BACK TO PRODUCTS
All Products
Filter by
Products
My Filters
Primer
Intergard 361
A two pack, low temperature cure, epoxy universal primer which can be overcoated with various finish coats such as polyurethane, epoxy and alkyd finishes after extended periods, without the use of a tie coat. It is also used as a primer over galvanised steel and stainless steel.
Lining
Devran 133
A 100% solids, two-component epoxy coating for tank lining and repair of pitted steel surfaces. *Please note this product is only available in North America.
Primer
Intershield 300V
A light coloured, abrasion resistant, aluminium pure epoxy coating giving excellent long term anticorrosive protection and low temperature application capability.
Primer-Finish
Intergard 452
Intergard 452 is a two component, high build epoxy intermediate. Pigmented with micaceous iron oxide to comply with the requirements of BS5493:1977
Finish
Interbuild 1003
Interbuild 1003 is a high performance, two component epoxy primer with excellent chemical and abrasion resistance properties. Interbuild 1003 is especially suited for mechanically prepared concrete substrates or porous substrates that prone to weakness, due to excellent penetration and high adhesion properties.
Filler
Devfil 145
A two-component epoxy filler and surfacer for interior and exterior concrete and masonry. *Please note this product is only available in North America.
Other
Interbuild 1081
Interbuild 1081 is a pigmented, solvent free, self-smoothing, Epoxy overlay system designed to provide seamless protection of Concrete substrates from 2mm to 5mm. Interbuild 1081 will provide a gloss finish with excellent wear characteristics and abrasion resistance, high levels of chemical resistance and an easy to clean smooth finish.
Primer-Finish
Interzone 9545
A two component, ultra-low VOC, fast curing, hybrid epoxy technology. As a heavy duty epoxy barrier coating formulated for single leg airless spray application Interzone 9545 is designed to provide long term corrosion protection in aggressive offshore environments. Approved to Norsok M-501 System 7A and 7B Interzone 9545 shows excellent corrosion resistance to abrasion and cathodic disbondment.
Primer-Finish
Intergard 343
A high volume solids, light coloured, aluminium pure epoxy universal primer with good corrosion and abrasion resistance. Suitable for application at low temperatures.
Primer
Intershield 300HS
A high solids, abrasion resistant, aluminum pigmented pure epoxy coating, Intershield 300HS provides excellent long term anticorrosive protection and low temperature cure capability. Intershield 300HS is a universal primer that can also be used as a ballast tank coating