BACK TO PRODUCTS

All Products

Filter by

Products

43 Product Found
My Filters
    Filler
    RELEST Wind Putty Contour - I373-3615
    RELEST Wind Putty Contour 3K is a Solvent-free, highly viscous polyurethane putty for smoothing surface and contour irregularities. Its easy sanding and rapid cure properties offers increased productivity for further processing and recoating. RELEST Wind Putty Contour is ideally situated for manual application.
    Surface Tolerant
    RELEST Wind Putty Porefiller - I372-5915
    RELEST Wind Putty Porefiller is a 2K polyurethane for filling medium pinholes. UV- and weather- resistant with very fast drying properties and long workable life. It is compatible with all RELEST coating systems and can be recoated without sanding.
    Surface Tolerant
    RELEST Wind Putty Porefiller Cartridge - I372-6015
    RELEST Wind Putty Porefiller Cartridge I372-6015 is a 2K polyurethane for filling small pinholes. UV- and weather- resistant with very fast drying properties and long workable life. It is compatible with all RELEST coating systems and can be recoated without sanding. It is supplied in a convenient 2-component cartridge for direct application of minimal quantities without weighing.
    Filler
    RELEST Wind Putty Protect TEC - I373-4015
    RELEST Wind Putty Protect TEC is a two-component viscoplastic, solvent-free, fast curing and easy to sand polyurethane filler for smoothing surface and contour irregularities. RELEST Wind Putty Protect TEC is especially designed for protecting the leading edge of rotor blades of wind energy plants from erosion damage caused by rain, sand, hail, dirt and other particles suspended in the air.
    Filler
    RELEST Wind Putty Protect TEC Cartridge - I373-4115
    RELEST Wind Putty Protect TEC is a two-component viscoplastic, solvent-free, fast curing and easy to sand polyurethane filler for smoothing surface and contour irregularities. RELEST Wind Putty Protect TEC is especially designed for protecting the leading edge of rotor blades of wind energy plants from erosion damage caused by rain, sand, hail, dirt and other particles suspended in the air. It is supplied in a convenient 2-component cartridge for direct application of minimal quantities without weighing.
    Surface Tolerant
    RELEST Wind Putty Porefiller - I372-5615
    RELEST Wind Putty Porefiller is a 2K polyurethane for filling small pinholes. UV- and weather- resistant with very fast drying properties and long workable life. It is compatible with all RELEST coating systems and can be recoated without sanding.
    Temporary Protection
    RELEST Wind ProcessCoat - I373-2050
    RELEST Wind ProcessCoat is a Solvent-free translucent 2K polyurethane for use as an in-mold gelcoat with low film thicknesses. Utilizing the new generation of UV absorbers allows for temporary outdoor storage of uncoated rotor blades, without the risk of UV light damaging the substrate. The product's great sandability facilitates the further treatment of demoulded rotor blades and forms an excellent, pore-free basis for subsequent coatings.
    Filler
    RELEST Wind Putty Contour Cartridge - I373-3715
    RELEST Wind Putty Contour Cartridge is a Solvent-free, highly viscous polyurethane putty for smoothing surface and contour irregularities. Its easy sanding and rapid cure properties offers increased productivity for further processing and recoating. RELEST Wind Putty Contour is ideally situated for mechanical application. It is supplied in a convenient 2-component cartridge for direct application of minimal quantities without weighing.
    Primer-Finish
    RELEST Wind Adhesion Promoter - I367-0080
    RELEST Wind Adhesion Promoter is a two component polyurethane material designed to ensure optimal adhesion for PVC, aluminium cast, CDC, PMAA and GRP based on epoxy or polyester. It is is especially suited for use in combination with wear protection coatings for rotor blades.
    Temporary Protection
    RELEST Wind LEP ETU Cartridge - I374-8735
    RELEST Wind LEP ETU Cartridge I374-8735 Easy To Use is a two-component solvent-free polyurethane coating for the M&R market which is especially designed for protecting the leading edge of rotor blades of wind energy plants from erosion damage caused by rain, sand, hail, dirt and other particles suspended in the air. The coating consists of an exceptionally fast, hard wearing, UV- and abrasion resistant polyurethane elastomer. It is supplied in a convenient 2-component cartridge for direct application of minimal quantities without weighing.
    Filler
    RELEST Wind Putty Contour - I373-9901
    RELEST Wind Putty Contour is a Solvent-free, highly viscous polyurethane putty for smoothing surface and contour irregularities. Its easy sanding and rapid cure properties offers increased productivity for further processing and recoating. RELEST Wind Putty Contour is ideally situated for mechanical application.
    Finish
    Interthane 976
    A two component, fast drying, acrylic polyurethane clear finish giving excellent durability and long term recoatability.
    Finish
    Interthane1022
    A two component acrylic polyurethane finish giving excellent durability and long term recoatability
    Finish
    Devthane 389H
    A high performance, low VOC, two-component chemically-cured aliphatic urethane gloss finish.
    Primer-Finish
    Devthane 359H
    A high performance, low VOC, two-component chemically-cured aliphatic urethane gloss finish.
    1. 1

    Sorry, we couldn't find any results
    Fetching the data, please wait...