Lining
Enviroline 376F-60LT
Low Temperature Application and Cure Reinforced Tank Lining.
BACK TO PRODUCTS
Infrastructure
Solutions for Structural Integrity and Design Excellence
- Ensure safety and durability.
- Enhance impact resistance.
- Maintain design aesthetics for years to come.
Filter by
Products
My Filters
Primer
Intergard 242
A general purpose, two component epoxy anti-corrosive primer pigmented with zinc phosphate to comply with BS5493:1977.
Finish
Interthane 1027
A two component, high build, acrylic polyurethane primer/finish providing anti-corrosion barrier protection and long term recoatability.
Structural Concrete- Repair and Protection
Intercrete 4871 (formerly Steel Reinforcement Protector 841)
A two component, water based, polymer modified cementitious anti-corrosive coating. *Selective Countries Only - Please contact your local representative.
Temperature Resistance
Intertherm 751CSA
An innovative, high build, ‘cold spray’ applied coating, Intertherm 751CSA is based on titanium modified inorganic copolymer technology. Capable of providing corrosion protection, Intertherm 751CSA is a high performance coating applied using standard application equipment curing effectively at ambient temperatures. Suitable for steel operating at temperatures between -196°C (-321°F) and 650ºC (1202ºF), Intertherm 751CSA does not require additional heat curing prior to being placed in service.
Primer
Interdur 8817
A two component, metallic zinc rich epoxy primer, which complies with the composition requirements of Chinese Chemical Industrial Standard HG/T3668.
Lining
Enviroline 222
A solvent free, two component polycyclamine cured lining system utilising advanced epoxy novolac technology.
Finish
Tru-Glaze-WB 4426
A high performance, two component, chemically-cured waterborne semi-gloss epoxy finish.
Passive Fire Protection
Intertherm 7050
Intertherm 7050 is a high performance, durable solvent-free epoxy for use in hot or cold conditions, where long term corrosion protection and thermal insulation are required. Low installed weight and excellent damage and impact resistance make Intertherm 7050 ideal for offsite module fabrication. Duplex systems with Chartek provide both fire and cryogenic spill protection.
Subsea, Abrasion Resistant and Splashzone
Interzone 1000
With proven track record spanning over 30 years, low VOC Interzone 1000 is a high build, two component epoxy coating pigmented with lamellar glass flake. Interzone 1000 extends asset lifetime by providing outstanding abrasion and corrosion resistance to steelwork located in the harshest offshore environments. Interzone 1000 can also be used in deck coating systems with appropriate aggregate.
Primer-Finish
Interthane 3230SG
A two component, semi- gloss, low VOC, high solids, fast curing, polyurethane primer/finish pigmented with zinc phosphate to provide added anti-corrosive performance and a durable, decorative finish.
Primer
Interzinc 2265
Part of the Interzinc 22 series of products.A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer. Conforms to SSPC Paint 20 Level 3.Available in ASTM D520, Type II zinc dust version as standard
Primer-Finish
Interthane 3230HG
A two component, high gloss, low VOC, high solids, fast curing, polyurethane primer/finish pigmented with zinc phosphate to provide added anti-corrosive performance and a durable, decorative finish.