Thermal Power

Product Applications

We offer a wide range of high performance coatings that provide long term corrosion protection and aesthetics

Filter by

Products

276 Product Found
My Filters
    Lining
    Interline 961
    A two component, solvent based epoxy phenolic tank lining for application to both new steel, or lightly pitted surfaces.
    Lining
    Interline 955
    A two component, heavy duty vinyl ester coating reinforced with glass flake to increase chemical and abrasion resistance.A chemically resistant, vinyl ester coating which can be applied using standard airless spray equipment at material temperatures up to 35°C (95°F).
    Other
    Enviroline 405HTR MR System
    Enviroline 405HTR MR is a reinforced chemcial resistant system. The system features a high temperature reesistant, 100% volume high solids, two component polycyclamine cured lining topcoat. Fibre glass mat reinforcement increases physical properties and where necessary allows dynamic crack bridging in concrete.In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
    Primer
    Interprime 484
    Interprime 484 is an air drying Zinc Phosphate Primer designed for application to all types of steel surfaces.This primer is characterised by good anti-corrosive properties, easy application and the ability to protect hand cleaned steel.
    Subsea, Abrasion Resistant and Splashzone
    Interzone 2000
    A very high solids, low VOC, two component ambient cure polyester containing a high level of chemically resistant glass flake which imparts properties of excellent corrosion, abrasion and chemical resistance.
    Lining
    Enviroline 376F-30LT
    Low Temperature Application and Cure Tank Lining.
    Lining
    Ceilcote 64 Lining
    CEILCOTE 64 Lining is a heavy-duty lining that protects steel and concrete in immersion service from strong chemicals. The lining is formulated from polyester resin, inert fillers, and fiberglass reinforcement. It can withstand solution temperatures to 160°F (71°C) in immersion service.
    Chemical Resistant Lining
    Ceilcote 242LSE flakeline
    CEILCOTE 242 LSE Flakeline coating is a low surface energy, flake filled, catalyzed vinyl ester system with excellent resistance to organic and inorganic acid solutions and many aliphatic solvents.
    Lining
    Interline 975P
    A two component, solvent free, heavy duty epoxy tank lining.
    Passive Fire Protection
    Interchar 1120HY
    A single component, borate and chlorine free, water borne intumescent coating designed for on-site application to interior exposed structural steel requiring protection from cellulosic fire. Interchar 1120HY is a low VOC acrylic intumescent material independently fire tested for up to 3 hour fire ratings in accordance with ASTM E119/UL263.
    Primer
    Interzone 1020
    A two component, glass flake reinforced ambient cure isophthalic polyester coating.
    Chemical Resistant Lining
    Ceilcote 600 flakeline
    Lining
    Interline 967
    A two component, solvent free glass reinforced epoxy laminate system.
    Chemical Resistant Lining
    Ceilcote 6400 Ceilcrete
    The CEILCOTE 6400 Ceilcrete Series are time-tested and proven developments in chemical-resistant surfacing. They are designed especially for the protection of concrete and steel against the attack of corrosive chemicals. They provide excellent resistance to strong oxidizing acid solutions such as nitric, sulfuric and chromic. CEILCOTE 6400 Ceilcrete Series are trowel applied, in combination with a heavy-duty reinforcing layer of fiberglass or synthetic cloth.
    Other
    Interplus 4102 Odin Gel
    A single component, water-based rust remover / cleaner gel. Interplus 4102 Odin Gel is 100% biologically degradable, free for toxins and conforms to the yellow classification of the Harmonised Offshore Chemical Notification Format (HOCNF).
    Fetching the data, please wait...