Transportation and Pipeline

Product Applications

Effective corrosion protection against some of the most aggressive chemicals, maximizing in-service time and profitability

Filter by

Products

219 Product Found
My Filters
    Lining
    Interline 961
    A two component, solvent based epoxy phenolic tank lining for application to both new steel, or lightly pitted surfaces.
    Primer
    Pre-Prime 167
    A high performance, two-component chemically-cured 100% solids epoxy penetrating sealer.
    Finish
    Devthane 379
    A high performance, two-component chemically-cured aliphatic urethane gloss finish. *Please note this product is only available in North America.
    Structural Concrete- Repair and Protection
    Intercrete 4804 (formerly Marine Mortar S)
    A two component, water-based (VOC-free), fibre reinforced, polymer modified, cementitious mortar with excellent adhesion for use in areas subject to early immersion. Intercrete 4804 cures rapidly to produce a high strength mortar with enhanced polymeric properties for the repair of voids in aggressive marine environments. Suitable for thicknesses up to 50mm.
    Temperature Resistance
    Intertherm 50
    A single component, high temperature coating based on a moisture-curing silicone binder, Intertherm 50 is ideal for the protection of steel from corrosion at temperatures up to 540°C (1004°F). The moisture-curing crosslinking technology of Intertherm 50 allows multiple coats to be applied without heat curing.
    Intermediate
    Intergard 475HS
    Intergard 475HS is a low VOC, high solids, high build epoxy used to improve barrier protection for a range of anticorrosive coating systems in a wide range of aggressive environments. Intergard 475HS can be pigmented with MIO to provide improved overcoating properties, better facilitating application in the fabrication shop.
    Primer
    Interzinc 2277
    Part of the Interzinc 22 series of products.A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer. Conforms to SSPC Paint 20 Level 2Available in ASTM D520, Type II zinc dust version as standard.
    Lining
    Interline 955
    A two component, heavy duty vinyl ester coating reinforced with glass flake to increase chemical and abrasion resistance.A chemically resistant, vinyl ester coating which can be applied using standard airless spray equipment at material temperatures up to 35°C (95°F).
    Concrete Repair
    Intergard 2002
    A two-component, high solids and high build polyamine-cured epoxy.
    Temperature Resistance
    Intertherm 228HS
    A highly crosslinked, two component, high build epoxy phenolic coating, Intertherm 228HS combines properties of corrosion and chemical resistance when used in high temperature service. Based upon novolac resin technology, Intertherm 228HS can be used in a wide range of highly corrosive environments operating at temperatures up to 230°C (446°F).
    Other
    Enviroline 405HTR MR System
    Enviroline 405HTR MR is a reinforced chemcial resistant system. The system features a high temperature reesistant, 100% volume high solids, two component polycyclamine cured lining topcoat. Fibre glass mat reinforcement increases physical properties and where necessary allows dynamic crack bridging in concrete.In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
    Chemical Resistant Lining
    Ceilcote 800 Coroline
    CEILCOTE 800 Coroline lining is a heavy duty, monolithic flooring/lining system that is designed to protect concrete and metal against attack by corrosive chemicals and mechanical abuse. Based on novolac epoxy technology, CEILCOTE 800 Coroline lining provides exceptional resistance to 98% Sulfuric Acid, Sodium Hydroxide and other aggressive chemicals.
    Structural Concrete- Repair and Protection
    Intercrete 4811 (formerly Bond-Prime)
    A single component, water-based (VOC free), rapid curing, acrylic copolymer modified with a unique water-emulsified epoxy cross-linking agent. Intercrete 4811 is inherently hydrophobic and alkali resistant, making it ideal for application to a wide range of new and aged mineral substrates.
    It is non-hazardous, and application is by brush, roller or airless spray to prime and stabilise surfaces prior to the application of Flexcrete’s specialist membranes. Intercrete 4811 cures to form a clear film with an identifying green tint, both on and within the substrate, to provide an ideal surface for subsequent treatment.
    Finish
    Devthane 379N
    A low VOC, two component modified acrylic polyurethane finish giving excellent durability and long-term
    recoatability, for use over correctly prepared primed surfaces. This product is also HAPS free and
    exempt solvent free.
    Primer
    Intergard 291
    A two component epoxy anti-corrosive primer.
    Fetching the data, please wait...