BACK TO PRODUCTS

Wind Power

Comprehensive Coating Solutions for Renewable Energy
  • Protect wind turbines from harsh environments.
  • Extend component lifespan from tip to toe.
  • Ensure compliance with industry standards.
     

EXPLORE CASE STUDIES

CASES

Protecting the World's Largest Offshore Wind Farm

Filter by

Products

130 Product Found
My Filters
    Primer-Finish
    Interdur 8844
    A low VOC, two component high build, high solids, epoxy immersion coating. Designed to give long term protection in a single coat for immersion service situations. A winter curing agent is available to assist faster turn around times in cold conditions. CHINA ONLY
    Other
    RELEST Wind LEP ETU - I374-8735
    RELEST Wind LEP Easy To Use is a two-component solvent-free polyurethane coating for the M&R market which is especially designed for protecting the leading edge of rotor blades of wind energy plants from erosion damage caused by rain, sand, hail, dirt and other particles suspended in the air. The coating consists of an exceptionally fast, hard wearing, UV- and abrasion resistant polyurethane elastomer.
    Surface Pre-Treatment
    Devprep 88
    A concentrated water based cleaner low in odour, non-flammable and biodegradable. *Please note this product is only available in North America.
    Subsea, Abrasion Resistant and Splashzone
    Interzone 954GF
    A high solids, low VOC epoxy barrier coat, reinforced with chemically resistant high aspect ratio lamellar glass flake for enhanced durability, abrasion and corrosion protection with excellent cathodic disbondment performance.
    Primer-Finish
    RELEST Wind Adhesion Promoter - I367-0080
    RELEST Wind Adhesion Promoter is a two component polyurethane material designed to ensure optimal adhesion for PVC, aluminium cast, CDC, PMAA and GRP based on epoxy or polyester. It is is especially suited for use in combination with wear protection coatings for rotor blades.
    Passive Fire Protection
    Interchar 1260
    Interchar 1260 is a class leading single component, zero VOC thin film waterborne intumescent coating designed for onsite application. It provides up to 90 minutes fire resistance to interior structural steelwork whilst maintaining desirable aesthetics. Its quick drying formulation allows for fast project completion with 60 minute fire protection provided via single coat application
    Subsea, Abrasion Resistant and Splashzone
    Interzone 505
    A high solids, low VOC, high build glass flake epoxy, Interzone 505 is a tough, fast drying primer that provides excellent long term anticorrosive and abrasion protection. Interzone 505 is designed for the protection of steelwork in severe corrosive environments, such as splash zones, pilings and chemical plants.
    Finish
    Devthane 378
    A high performance, two component, chemically cured, aliphatic urethane semi-gloss finish. *Please note this product is only available in North America.
    Temperature Resistance
    Interbond 1202UPC
    Interbond 1202UPC is a universal pipe coating that provides external protection for above ground piping and accessories operating between -196ºC (-321ºF) and 650ºC (1202ºF). Interbond 1202UPC reduces coating complexity and overall project painting costs by standardizing coating specifications, providing excellent corrosion protection in a wide range of operating environments including corrosion under insulation (CUI) conditions. Based on an inorganic copolymer resin system, Interbond 1202UPC is compliant with the performance criteria of the ISO12944-9 cyclic aging test, without a primer.
    Lining
    Interline 850
    A versatile thin film epoxy phenolic tank lining with an extended overcoating interval of up to 30 days, Interline 850 expands your options when scheduling maintenance. It can be used direct to metal, as both holding primer and build coat in a system, and with tanks returning to service in as little as five days, Interline 850 can further improve schedule.
    Primer
    Intershield 4000USP
    Intershield 4000USP is designed as a zinc free high performance primer that provides very high durability performance in aggressive environments when used as part of a 3 coat system.
    Finish
    Interthane 990E
    Interthane® 990E is the latest aliphatic acrylic polyurethane finish from AkzoNobel and builds on the trusted globally renowned performance properties of Interthane 990.
    Lining
    Interline 984
    A premium solvent-free epoxy phenolic tank lining, Interline 984 is formulated with ease of application at the forefront. Wide ranging resistance allows for multiple end uses to be covered by the same product, saving time during specification. Excellent flow and levelling properties enhance pit filling characteristics, making it the ideal lining for refurbishing tanks. Interline 984 is also available in a conductive version, Interline 984C, which is compliant with DIBt regulations.
    Subsea, Abrasion Resistant and Splashzone
    Interzone 485
    An ultra-high build, high volume solids, two component catalysed epoxy, Interzone 485 is ideal for the long term protection of steelwork in severe environments where high abrasion and corrosion resistance are required. Interzone 485 provides excellent resistance to alkalis, chemicals and petroleum products, and when used in conjunction with appropriate aggregate, it provides a tough, durable non-slip deck system.
    Lining
    Interline 984C
    A two component, chemically resistant, 100% solids, high build epoxy phenolic tank lining providing static dissipation properties.
    1. 1

    Sorry, we couldn't find any results
    Fetching the data, please wait...