A two component, solvent based epoxy phenolic tank lining for application to both new steel, or lightly pitted surfaces.
Primer
Intergard 1032
A two component epoxy anti-corrosive primer pigmented with zinc phosphate.
Primer
Intergard 436
A two component clear epoxy sealer.Can be applied to slightly damp concrete. Cures quickly, long pot life. Excellent resistance to most alkalis, solvents, mild acids and water. Good toughness and resilience. Excellent binding properties to weathered fibrous cement sheeting.
Subsea, Abrasion Resistant and Splashzone
Interzone 762
A two component, styrene free, glass flake reinforced ambient cure polyester/acrylic copolymer coating.
Finish
Interthane 976
A two component, fast drying, acrylic polyurethane clear finish giving excellent durability and long term recoatability.
Primer
Intergard 2511
A two component, low VOC, high solids, epoxy primer containing zinc phosphate anti-corrosive pigmentation.This primer's versatile application properties provide robust film thickness control as supplied, without the need to thin.
Chemical Resistant Lining
Ceilcote 140 Flakeline
Ceilcote 140 Flakeline is a heavy duty, glass flake reinforced, chemically resistant vinyl ester lining for protection of steel against aggressive chemicals in immersion service. Uses Ceilcote #2 Hardener.
Surface Pre-Treatment
Interplus 614
A single component, water based rust remover gel, which can be described as readily biodegradable as tested by OECD 301B CO2 Evolution test.
Finish
Interthane1022
A two component acrylic polyurethane finish giving excellent durability and long term recoatability
Primer
Interbuild 1002
Interbuild 1002 is a high performance, two component epoxy primer with excellent chemical and abrasion resistance. It exhibits good penetration properties to ensure good adhesion on concrete floors. Interbuild 1002 is especially suited for properly prepared concrete substrates.
Reference
Ceilcote 165 Grout
Ceilcote 165 Grout is a carefully blended, three component vinyl ester grout. It is designed for grouting pumps, vessels and equipment that are subjected to chemical exposure.
Concrete Repair
Intergard 2002
A two-component, high solids and high build polyamine-cured epoxy.
Finish
Interlac 800
A sing component, high solids, low VOC, 30% silicone content, modified alkyd
Intermediate
Interdur 8842
A two component, high solids, low VOC epoxy micaceous iron oxide coating formulated on proprietary polymer technology which provides rapid cure and overcoating even under low temperature conditions.
Other
Ceilcote 6650AR Ceilcrete System
Ceilcote 6650AR Ceilcrete is a trowel-applied abrasion resistant novolac vinyl ester system designed specifically for the protection of steel and concrete against corrosive chemicals and abrasion. The system includes a fibreglass reinforcing layer.In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.