Finish
Interthane 976
A two component, fast drying, acrylic polyurethane clear finish giving excellent durability and long term recoatability.
BACK TO PRODUCTS
All Products
Filter by
Products
My Filters
Filler
RELEST Wind Putty Contour - I373-3615
RELEST Wind Putty Contour 3K is a Solvent-free, highly viscous polyurethane putty for smoothing surface and contour irregularities. Its easy sanding and rapid cure properties offers increased productivity for further processing and recoating. RELEST Wind Putty Contour is ideally situated for manual application.
Passive Fire Protection
Chartek 1960 CSP
Chartek 1960CSP intumescent material combined hydrocarbon fire protection and insulation against cryogenic liquid exposure.
Topcoat
RELEST Wind HS Topcoat - I306-xxxx
RELEST Wind HS Topcoat is a matt waterborne 2K acrylic polyurethane topcoat for use as a finishing coat on rotor blades. It offers quick drying for fast overcoating, even at high film thicknesses without the risk of blistering. It is suited for roller and spray applciaiton. RELEST Wind HS Topcoat has excellent UV and weathering resistance properties for long term protection and performance.
Other
RELEST Wind LEP ETU - I374-6735
RELEST Wind LEP Easy To Use is a two-component solvent-free polyurethane coating for the M&R market which is especially designed for protecting the leading edge of rotor blades of wind energy plants from erosion damage caused by rain, sand, hail, dirt and other particles suspended in the air. The coating consists of an exceptionally fast, hard wearing, UV- and abrasion resistant polyurethane elastomer.
Primer
Intershield 300V
A light coloured, abrasion resistant, aluminium pure epoxy coating giving excellent long term anticorrosive protection and low temperature application capability.
Structural Concrete- Repair and Protection
Intercrete 4842
A two component, polymer modified, elastomeric cementitious coating for the protection of concrete and masonry which exhibits cracking and where further movement is expected. *Selective Countries Only - Please contact your local representative.
Temperature Resistance
Intertherm 891
A one component, general purpose heat resistant paint, based on air drying oleoresinous resins, and pigmented with aluminium flake.
Primer-Finish
Intergard 452
Intergard 452 is a two component, high build epoxy intermediate. Pigmented with micaceous iron oxide to comply with the requirements of BS5493:1977
Finish
Interbuild 1003
Interbuild 1003 is a high performance, two component epoxy primer with excellent chemical and abrasion resistance properties. Interbuild 1003 is especially suited for mechanically prepared concrete substrates or porous substrates that prone to weakness, due to excellent penetration and high adhesion properties.
Other
RELEST Wind Gelcoat - I372-7235
RELEST Wind Gelcoat ca. RAL 7035, RA is a solvent free 2k viscoplastic, polyaspartic coating with excellent abrasion resistance. Suitable as part of a coating system for UV- and weather- resistance. Film thicknesses of approximately 200μm can be achieved in one step with optimal flow properties. RELEST Wind Gelcoat ca. RAL 7035, RA is characterised by its great adhesion to epoxy laminate.