BACK TO PRODUCTS

All Products

Filter by

Products

598 Product Found
My Filters
    Primer
    Intergard 361
    A two pack, low temperature cure, epoxy universal primer which can be overcoated with various finish coats such as polyurethane, epoxy and alkyd finishes after extended periods, without the use of a tie coat. It is also used as a primer over galvanised steel and stainless steel.
    Lining
    Devran 133
    A 100% solids, two-component epoxy coating for tank lining and repair of pitted steel surfaces. *Please note this product is only available in North America.
    Lining
    Bar-Rust 233H LV
    A low VOC, high performance, multi-purpose, surface tolerant, two-component chemically-cured epoxy semi-gloss coating.
    Primer
    Intershield 300V
    A light coloured, abrasion resistant, aluminium pure epoxy coating giving excellent long term anticorrosive protection and low temperature application capability.
    Structural Concrete- Repair and Protection
    Intercrete 4842
    A two component, polymer modified, elastomeric cementitious coating for the protection of concrete and masonry which exhibits cracking and where further movement is expected. *Selective Countries Only - Please contact your local representative.
    Temperature Resistance
    Intertherm 891
    A one component, general purpose heat resistant paint, based on air drying oleoresinous resins, and pigmented with aluminium flake.
    Finish
    Interbuild 1003
    Interbuild 1003 is a high performance, two component epoxy primer with excellent chemical and abrasion resistance properties. Interbuild 1003 is especially suited for mechanically prepared concrete substrates or porous substrates that prone to weakness, due to excellent penetration and high adhesion properties.
    Other
    RELEST Wind Gelcoat - I372-7235
    RELEST Wind Gelcoat ca. RAL 7035, RA is a solvent free 2k viscoplastic, polyaspartic coating with excellent abrasion resistance. Suitable as part of a coating system for UV- and weather- resistance. Film thicknesses of approximately 200μm can be achieved in one step with optimal flow properties. RELEST Wind Gelcoat ca. RAL 7035, RA is characterised by its great adhesion to epoxy laminate.
    Finish
    Intersheen 579
    A single component, fast drying, modified acrylic finish.
    Primer
    Interzinc 12
    A two component solvent based inorganic zinc-rich ethyl silicate primer. Complies with the composition and performance requirements of SSPC Paint 20.
    Lining
    Enviroline 376F-30LT
    Low Temperature Application and Cure Tank Lining.
    Filler
    Devfil 145
    A two-component epoxy filler and surfacer for interior and exterior concrete and masonry. *Please note this product is only available in North America.
    Surface Tolerant
    RELEST Wind Putty Porefiller - I372-5915
    RELEST Wind Putty Porefiller is a 2K polyurethane for filling medium pinholes. UV- and weather- resistant with very fast drying properties and long workable life. It is compatible with all RELEST coating systems and can be recoated without sanding.
    Primer
    Interzinc 1065
    Containing more than 65% zinc, Interzinc 1065 is an ideal zinc-rich epoxy primer for steel in corrosive environments. Conforming to SSPC Paint 20 Level 3 and HG/T3668, Interzinc 1065 is recommended as part of a three coat system with an epoxy intermediate barrier coating and polyurethane or polysiloxane coloured topcoat.
    Preconstruction Primer
    Interplate 855
    A two pack, zinc silicate shop (pre-construction) primer providing good corrosion protection even after heating up to 800°C (1472°F) and resistance to damage caused by welding, gas cutting and fairing. Suitable for fast welding processes and offers control of secondary surface preparation requirements.
    1. 1

    Sorry, we couldn't find any results
    Fetching the data, please wait...