Finish
Devthane 379
A high performance, two-component chemically-cured aliphatic urethane gloss finish. *Please note this product is only available in North America.
BACK TO PRODUCTS
All Products
Filter by
Products
My Filters
Finish
Interthane 976
A two component, fast drying, acrylic polyurethane clear finish giving excellent durability and long term recoatability.
Filler
RELEST Wind Putty Contour - I373-3615
RELEST Wind Putty Contour 3K is a Solvent-free, highly viscous polyurethane putty for smoothing surface and contour irregularities. Its easy sanding and rapid cure properties offers increased productivity for further processing and recoating. RELEST Wind Putty Contour is ideally situated for manual application.
Finish
Interthane 1022
A two component acrylic polyurethane finish giving excellent durability and long term recoatability
Finish
Interthane 990FD
A two component fast dry acrylic polyurethane finish giving excellent durability and long term recoatability. Interthane 990FD is a regional product, supported in North America.
Surface Tolerant
RELEST Wind Putty Porefiller - I372-5915
RELEST Wind Putty Porefiller is a 2K polyurethane for filling medium pinholes. UV- and weather- resistant with very fast drying properties and long workable life. It is compatible with all RELEST coating systems and can be recoated without sanding.
Finish
Interthane 990UHS
A low VOC, two component acrylic polyurethane high performance finish coat with excellent gloss and colour retention on exterior exposure, for use over correctly prepared primed surfaces.International Paint also offers Interthane 990UHS in a mildew resistant, bright white finish. Contact your International Paint representative for additional information.
Finish
Interthane 870UHS
A low VOC, high build, semi-gloss urethane finish with excellent gloss and colour retention on exterior exposure, for use over correctly prepared and primed surfaces.The VOC is below 250 g/l to conform to local VOC regulations.
Finish
Devthane 378H
A high performance, low VOC, two-component chemically-cured aliphatic urethane semi-gloss finish. *Please note this product is only available in North America.
Filler
RELEST Wind Putty Contour - I373-9901
RELEST Wind Putty Contour is a Solvent-free, highly viscous polyurethane putty for smoothing surface and contour irregularities. Its easy sanding and rapid cure properties offers increased productivity for further processing and recoating. RELEST Wind Putty Contour is ideally situated for mechanical application.
Temporary Protection
RELEST Wind LEP ETU Cartridge - I374-6735
RELEST Wind LEP Easy To Use is a two-component solvent-free polyurethane coating for the M&R market which is especially designed for protecting the leading edge of rotor blades of wind energy plants from erosion damage caused by rain, sand, hail, dirt and other particles suspended in the air. The coating consists of an exceptionally fast, hard wearing, UV- and abrasion resistant polyurethane elastomer. It is supplied in a convenient 2-component cartridge for direct application of minimal quantities without weighing.
Primer-Finish
Interdur 8843SG
A two component, high build, acrylic polyurethane primer/finish, containing zinc phosphate anticorrosive pigmentation, providing excellent durability and long-term recoatability. CHINA ONLY
Finish
Interthane 990HS
A low VOC, two component acrylic polyurethane high performance finish coat with excellent gloss and colour retention on exterior exposure, for use over correctly prepared primed surfaces.
Filler
RELEST Wind Putty Contour - I373-3715
RELEST Wind Putty Contour is a Solvent-free, highly viscous polyurethane putty for smoothing surface and contour irregularities. Its easy sanding and rapid cure properties offers increased productivity for further processing and recoating. RELEST Wind Putty Contour is ideally situated for mechanical application. It is supplied in a convenient 2-component cartridge for direct application of minimal quantities without weighing.