BACK TO PRODUCTS

All Products

Filter by

Products

55 Product Found
My Filters
    Lining
    Ceilcote 282HB Flakeline
    Ceilcote 282HB Flakeline has excellent resistance to hot flue gas environments. The coating system can achieve a dry film thickness of up to 1350 microns (54 mils) in a single coat with or without the use of a primer. The intent is to eliminate one application step where similar coating systems require two seperate applications. Ceilcote 282HB Flakeline is normally applied on metal surfaces with proper surface preparation.
    Chemical Resistant Lining
    Ceilcote 242LSE flakeline
    CEILCOTE 242 LSE Flakeline coating is a low surface energy, flake filled, catalyzed vinyl ester system with excellent resistance to organic and inorganic acid solutions and many aliphatic solvents.
    Chemical Resistant Lining
    Ceilcote 600 flakeline
    Lining
    Ceilcote 68 Lining
    Ceilcote 68 Lining is a fibreglass reinforced, toughened epoxy lining system developed for protection of concrete and steel surfaces that are subjected to immersion and corrosive chemical environments.
    Reference
    Ceilcote EJ-11
    Ceilcote EJ11 joint sealant system is a two component, chemical-resistant fluorelastomer compound designed as an expansion joint for linings and floorings as well as for sealing joints and cracks in concrete.
    Chemical Resistant Lining
    Ceilcote 242GF Flakeline
    Ceilcote 242GF Flakeline is a vinyl ester resin system with graphite fillers, which exhibits excellent resistance to organic and inorganic acid solutions, hot caustic, and oxidizing bleach solutions. It provides excellent resistance to hydrofluoric acid. Ceilcote 242GF Flakeline can be used where electrical conductivity is required.
    Finish
    Ceilcote 322 Flakeline
    Reference
    Ceilcote EJ-3
    Ceilcote EJ3 is a two component, pourable polysulfide elastomer designed for use in applications requiring a chemical resistant sealant for horizontal joints. Ceilcote EJ4 is trowel grade, for use on vertical and overhead surfaces. When cured Ceilcote EJ3/EJ4 forms a tight fitting synthetic rubber compound to effectively seal out water and many aggressive chemical solutions
    Chemical Resistant Lining
    Ceilcote 6640 Ceilcrete
    Ceilcote 6640 Ceilcrete is a trowel-applied vinyl ester system designed specifically for the protection of steel and concrete against corrosive chemicals. The system includes a synthetic or fibreglass reinforcing layer.
    Chemical Resistant Lining
    Ceilcote 6650 Ceilcrete
    Ceilcote 6650 Ceilcrete is a trowel-applied novolac vinyl ester system designed specifically for the protection of steel and concrete against corrosive chemicals. The system includes a synthetic or fibreglass reinforcing layer. Ceilcote 6650 Ceilcrete exhibits excellent resistance to a wide range of solvents, chlorinated aromatics and aliphatics.
    Grout
    Ceilcote 748 Corrosion Grout
    CEILCOTE 748 Corrosion Grout is a three-component chemicalresistant epoxy grouting material. It provides high strength, good adhesion to concrete and steel, minimal shrinkage and resists degradation by corrosive chemicals.
    Reference
    Ceilcote 610 Ceilpatch
    Ceilcote 610 Ceilpatch is a chemical-resistant epoxy patching/filling compound that is used to fill defects in concrete or steel surfaces prior to the application of Ceilcote lining, coating or flooring systems. It provides excellent adhesion to concrete or steel, minimal shrinkage and superior chemical resistance.
    Chemical Resistant Lining
    Ceilcote 140 Flakeline
    Ceilcote 140 Flakeline is a heavy duty, glass flake reinforced, chemically resistant vinyl ester lining for protection of steel against aggressive chemicals in immersion service. Uses Ceilcote #2 Hardener.
    Reference
    Ceilcote 165 Grout
    Ceilcote 165 Grout is a carefully blended, three component vinyl
    ester grout. It is designed for grouting pumps, vessels and equipment that are subjected to chemical exposure.
    Chemical Resistant Lining
    Ceilcote 800 Coroline
    CEILCOTE 800 Coroline lining is a heavy duty, monolithic flooring/lining system that is designed to protect concrete and metal against attack by corrosive chemicals and mechanical abuse. Based on novolac epoxy technology, CEILCOTE 800 Coroline lining provides exceptional resistance to 98% Sulfuric Acid, Sodium Hydroxide and other aggressive chemicals.
    1. 1

    Sorry, we couldn't find any results
    Fetching the data, please wait...