19 ProductsShare product selection
A two component, metallic zinc rich epoxy primer formulated to provide fast drying, rapid handling properties and excellent abrasion resistance.
A two component solvent based inorganic zinc-rich ethyl silicate primer. Complies with the composition and performance requirements of SSPC Paint 20.
Interzinc 125 is a self curing ethyl silicate based zinc rich coating with the zinc powder incorporated into the liquid component to give a single pack product.This product complies with the composition and performance requirements of SSPC Paint 20 and is characterised by excellent anticorrosive properties and easy application.
Containing 85% zinc, Interzinc 22 is an ideal zinc-rich silicate primer for steel in aggressive, corrosive environments. Rapid recoat technology allows faster throughput of coated steel, greatly enhancing productivity.
Part of the Interzinc 22 series of products.A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer. Conforms to SSPC Paint 20 Level 3.Available in ASTM D520, Type II zinc dust version as standard
Part of the Interzinc 22 series of products.A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer. Conforms to SSPC Paint 20 Level 2Available in ASTM D520, Type II zinc dust version as standard.
Part of the Interzinc 22 series, Interzinc 2280 is a two component, solvent-based silicate inorganic zinc-rich primer (80%) suitable for use with a wide range of high performance anticorrosive systems and topcoats in both maintenance and new construction.
A low VOC, inorganic zinc-rich ethyl silicate based primer providing outstanding corrosion protection for properly prepared steel surfaces. Contains 82% zinc dust in the dry film for long term corrosion protection.
A two component high solids, low VOC metallic zinc-rich epoxy primer formulated on proprietary polymer technology which provides rapid cure and overcoating even under low temperature conditions.Interzinc 315 uses zinc dust conforming to the requirements of ASTM D520 Type II as a minimum standard.
A three component, metallic, zinc rich epoxy primer which passes Slip B coefficient. Interzinc 315B complies with SSPC Paint 20 and contains minimum 80% zinc in the dry film.The zinc dust used in Interzinc 315B conforms to ASTM D520, Type II.