Finish

Core Range

Filter by

Products

52 Product Found
My Filters
    Primer-Finish
    Intergard 3500
    Designed for use in the rail industry as a one coat direct-to-metal exterior finish or a primer for approved topcoats; Intergard 3500 has excellent edge retentive properties and provides a combination of anti-corrosive barrier protection and abrasion, chemical fume and spillage resistance. Intergard 3500 is formulated with ultra high solids, providing an option where regulations or customer preference require low VOCs and zero HAPs coatings
    Primer-Finish
    Devran 224V
    A high performance, multi-purpose, surface tolerant, two-component chemically-cured epoxy semi-gloss coating for industrial or high performance architectural coating (HIPAC) applications. For use on properly prepared steel or masonry surfaces. *Please note this product is only available in North America.
    Primer-Finish
    Interbuild 1073
    Interbuild 1073 is a two component, high solids content epoxy primer typically used in maintenance environments due to excellent surface tolerance properties. With a low VOC content, the primer can also be applied within internal environments and complies with the Indoor air quality standard as stipulated by EPA Method 24.
    Primer-Finish
    RELEST Wind Adhesion Promoter - I367-0080
    RELEST Wind Adhesion Promoter is a two component polyurethane material designed to ensure optimal adhesion for PVC, aluminium cast, CDC, PMAA and GRP based on epoxy or polyester. It is is especially suited for use in combination with wear protection coatings for rotor blades.
    Intermediate
    InterH2O 499S
    InterH2O 499S is a two component, fast drying water borne epoxy coating. It is suitable for use as a direct-to-metal primer or as an intermediate.
    Primer-Finish
    Intergard 452
    Intergard 452 is a two component, high build epoxy intermediate. Pigmented with micaceous iron oxide to comply with the requirements of BS5493:1977
    Primer-Finish
    Interbuild 1094
    Interbuild 1094 is a pigmented, solvent free, self-smoothing, Epoxy overlay system designed to provide seamless protection of Concrete substrates from 0.5mm to 1mm. Interbuild 1094 will provide a gloss finish with excellent wear characteristics and abrasion resistance, high levels of chemical resistance and an easy to clean smooth finish.
    Primer-Finish
    Intergard 343
    A high volume solids, light coloured, aluminium pure epoxy universal primer with good corrosion and abrasion resistance. Suitable for application at low temperatures.
    Primer-Finish
    Intergard 966
    A high build, high performance, two component epoxy intermediate or finish with excellent chemical and abrasion resistance. Available with conventional pigmentation or alternatively, pigmented with micaceous iron oxide to provide enhanced overcoating properties.
    Primer-Finish
    Intercure 99NA
    Intercure 99NA polyaspartic technology is applied as a single coat at 150-250 microns (6-10 mils) direct-to-metal using standard application equipment, reducing application time and labour costs compared to two coat applications in moderately corrosive environments (up to C3, ISO 12944-2).Intercure 99NA is a low VOC, high solids, rapid cure primer/finish, offering excellent anticorrosive protection and long term colour and gloss durability – a combination that cannot be achieved with alternative fast cure, single coat primer finishes.Intercure 99NA may also be specified as a high build, durable intermediate/finish over approved anti-corrosive primers for more aggressive environments, i.e. ISO 12944 C4 and C5M.
    Primer-Finish
    Bar-Rust 231
    A low VOC, two component high build, high solids surface tolerant epoxy maintenance coating.
    Primer-Finish
    Tru-Glaze 4508H
    A high performance, versatile, two component, chemically cured tile-like epoxy coating with excellent chemical, corrosion, moisture, stain, and abrasion resistance.
    Primer-Finish
    Devcryl 1440
    A low VOC, single component, rust inhibitive water borne acrylic for use as a primer or finish applied directly to properly prepared metal, concrete or wood surfaces.
    Primer-Finish
    Intercryl 520
    A low VOC, single component, rust inhibitive water borne acrylic for use as a primer or finish applied directly to properly prepared metal, concrete or wood surfaces.
    Primer-Finish
    Intergard 7562
    A low VOC, two component, internally flexibilised, high build, surface tolerant epoxy primer. Pigmented with aluminium for increased corrosion resistance. HAPs free.
    Fetching the data, please wait...