We offer a complete coating solution range for the most demanding offshore environments around the world.
A high solids, low VOC, high build glass flake epoxy, Interzone 505 is a tough, fast drying primer that provides excellent long term anticorrosive and abrasion protection. Interzone 505 is designed for the protection of steelwork in severe corrosive environments, such as splash zones, pilings and chemical plants. NOTE: Interzone 505 will no longer be manufactured in 2022. The product is being phased out with Interzone 954GF as its replacement. Built on the track record of Interzone 954, Interzone 954GF has application and performance benefits when compared to Interzone 505.
With an extensive global track record spanning over 25 years, Interzone 954 is a high solids two component modified epoxy ideal for protecting and maintaining steel structures in the most severe environments. Particularly suited to maintenance situations, Interzone 954 is designed to give long term abrasion and corrosion protection in a single coat application and will continue to cure when immersed in water. Interzone 954 can also be used as a deck coating with appropriate aggregate.
Part of our UL 1709 product offer, boron-free Chartek 1709 provides long term corrosion and fire protection in a single system. Having covered millions of square meters over a period of 10 years, Chartek 1709 can be used with confidence for pool fires up to four hours, jet fires and vessel protection. Its low installed weight and excellent application properties make Chartek 1709 the ideal choice for modular construction or site application.
Solvent-free Interchar 212 is a high build, robust, two component modified epoxy intumescent providing damage resistant fire and corrosion protection for the most demanding construction projects. Interchar 212 has excellent mechanical and physical properties, all backed up by rigorous third party testing and approvals.
Intertherm 7050 is a high performance, durable solvent-free epoxy for use in hot or cold conditions, where long term corrosion protection and thermal insulation are required. Low installed weight and excellent damage and impact resistance make Intertherm 7050 ideal for offsite module fabrication. Duplex systems with Chartek provide both fire and cryogenic spill protection.
The fast drying properties and rapid recoatability of Interchar 404 lead to improved productivity while maintaining architectural aesthetics. Interchar 404 is a single component, solvent-based intumescent coating offering up to 120 minutes fire resistance to structural steelwork in accordance to EN 13381-8.
An innovative, high build, ‘cold spray’ applied coating, Intertherm 751CSA is based on titanium modified inorganic copolymer technology. Capable of providing corrosion protection, Intertherm 751CSA is a high performance coating applied using standard application equipment curing effectively at ambient temperatures. Suitable for steel operating at temperatures between -196°C (-321°F) and 650ºC (1202ºF), Intertherm 751CSA does not require additional heat curing prior to being placed in service.
A two component, chemically resistant epoxy phenolic tank lining.
A two component, low VOC, high solids, fast curing anticorrosive epoxy primer.Zinc Phosphate version also available.
Coatings & fire protection for upstream oil & gas
Coatings & fire protection for downstream oil & gas
Protecting wind turbines from tip-to-toe