Intersheen 7579 is a fast drying, one pack, modified acrylic finish that is optimised to provide low VOC and high volume solids.
Reference
Ceilcote EJ-4
Ceilcote EJ3 is a two component, pourable polysulfide elastomer designed for use in applications requiring a chemical resistant sealant for horizontal joints. Ceilcote EJ4 is trowel grade, for use on vertical and overhead surfaces. When cured Ceilcote EJ3/EJ4 forms a tight fitting synthetic rubber compound to effectively seal out water and many aggressive chemical solutions
Chemical Resistant Lining
Ceilcote 242AR Flakeline
Ceilcote 242AR Flakeline is a flake-filled, corrosion and abrasion resistant lining system. Uses Ceilcote #2 Hardener.
Primer
Intergard 242
A general purpose, two component epoxy anti-corrosive primer pigmented with zinc phosphate to comply with BS5493:1977.
Primer-Finish
Interthane 3230SG
A two component, semi- gloss, low VOC, high solids, fast curing, polyurethane primer/finish pigmented with zinc phosphate to provide added anti-corrosive performance and a durable, decorative finish.
Lining
Interbuild 1004
Interbuild 1004 is a high performance, two component epoxy primer with excellent chemical and abrasion resistance. It exhibits good penetration properties to ensure good adhesion on concrete floors. Interbuild 1002 is especially suited for properly prepared concrete substrates.
Primer
Enviroline 58HS
Enviroline 58HS is a high solids, low viscosity 250g/l VOC compliant rust inhibitive epoxy polyamide primer designed as an excellent holding primer for interior or exterior steel, concrete, and masonry surfaces requiring an extended recoat window.
Temporary Protection
Interseal 1122
A single component, spray applied, high build, water based coating for direct application over coated substrates and non-ferrous substrates. Interseal 1122 dries to form a non-tacky, tough, resilient temporary protective layer.
Finish
Interlac 648
A single component, speciality fluorescent alkyd coating specifically formulated to provide maximum visibility.
Finish
Interfine 2080HS
A fast-drying, high performance, high solids isocyanate free and tin free hybrid polysiloxane finish. Interfine 2080HS combines both acrylic and epoxy resin technology to deliver high durability with added flexibility and offers excellent gloss and colour retention when compared to conventional acrylic and polyurethane finishes. Being isocyanate-free and tin free can help to support the sustainability and HSE objectives of the contract chain - Interfine 2080HS does not produce di-isocyanates during onsite hot-work.
Primer
Intergard 1251
A two component epoxy zinc phosphate / micaceous iron oxide primer.
Temperature Resistance
Intertherm 50
A single component, high temperature coating based on a moisture-curing silicone binder, Intertherm 50 is ideal for the protection of steel from corrosion at temperatures up to 540°C (1004°F). The moisture-curing crosslinking technology of Intertherm 50 allows multiple coats to be applied without heat curing.
Intermediate
Intergard 475HS
Intergard 475HS is a low VOC, high solids, high build epoxy used to improve barrier protection for a range of anticorrosive coating systems in a wide range of aggressive environments. Intergard 475HS can be pigmented with MIO to provide improved overcoating properties, better facilitating application in the fabrication shop.
Temperature Resistance
Intertherm 228HS
A highly crosslinked, two component, high build epoxy phenolic coating, Intertherm 228HS combines properties of corrosion and chemical resistance when used in high temperature service. Based upon novolac resin technology, Intertherm 228HS can be used in a wide range of highly corrosive environments operating at temperatures up to 230°C (446°F).