We offer a complete coating solution range for the most demanding offshore environments around the world.
A solvent free, two component polycyclamine cured girth weld coating system utilising advanced epoxy novolac technology.
Part of the Interzinc 22 series, Interzinc 2280 is a two component, solvent-based silicate inorganic zinc-rich primer (80%) suitable for use with a wide range of high performance anticorrosive systems and topcoats in both maintenance and new construction. With rapid recoat and curing properties, Interzinc 2280 is capable of application in a wide range of climatic conditions and it conforms to SSPC Paint 20 Level 2 and ASTM D20 D520 Type II.
A high performance, two component, reinforced inorganic zinc-rich primer. NORTH AMERICA ONLY
Containing 85% zinc, Interzinc 22 is an ideal zinc-rich silicate primer for steel in aggressive, corrosive environments. Rapid recoat technology allows faster throughput of coated steel, greatly enhancing productivity. Interzinc 22 conforms to SSPC Paint 20 Level 1 and ASTM D20 D520 Type II and can also be used as a tank lining for the carriage of different chemical cargoes.
A low VOC, high solids, rapid cure primer/finish, Intercure 4500 offers excellent anticorrosive protection and long term aesthetic durability. Based upon innovative polyaspartic resin technology, Intercure 4500 can be applied as a single coat direct-to-metal or over suitable primers for more corrosive environments using standard application equipment. Its rapid cure characteristics (even at low temperatures) help to further optimize application time and reduce labor costs.
Interchar 1160 is a single component waterborne intumescent coating designed for onsite application. With zero VOC, Interchar 1160 offers a more environmentally friendly option for protection of structural steelwork, especially where aesthetics are important. Interchar 1160 is independently tested for up to 60 min fire in internal environments.
A two component solvent free elastomeric urethane. A chemically resistant elastomeric urethane which can be applied by heated, twin-feed airless spray.
Ceilcote 242HB Flakelineis a glass flake filled vinyl ester high build lining for use on steel and concrete substrates.Ceilcote 242HB Flakelinehas excellent resistance to organic and inorganic acid solutions and many aliphatic solvents. The coating system can achieve a dry film thickness of up to 1350 microns (54 mils) in a single coat. The intent is to eliminate one application step where similar coating systems require two separate applications. Ceilcote 242HB Flakeline can be applied on concrete and metal surfaces with proper surface preparation.
A two component acrylic polyurethane finish giving excellent durability and long term recoatability.
A single component, spray applied, high build, water based coating for direct application over coated substrates and non-ferrous substrates. Interseal 1122 dries to form a non-tacky, tough, resilient temporary protective layer.
Coatings & fire protection for upstream oil & gas
Coatings & fire protection for downstream oil & gas
Protecting wind turbines from tip-to-toe