BACK TO PRODUCTS

Onshore Oil and Gas

Reliable Coating Solutions for Long-Lasting Performance
  • Extend service life with durable coatings.
  • Reduce unplanned shutdowns with corrosion protection.
  • Optimize efficiency in tough onshore environments.
     

EXPLORE CASE STUDIES

CASES

Durable Protection for a Landmark LNG Project

Filter by

Products

361 Product Found
My Filters
    Other
    RELEST Wind Gelcoat - I372-7235
    RELEST Wind Gelcoat ca. RAL 7035, RA is a solvent free 2k viscoplastic, polyaspartic coating with excellent abrasion resistance. Suitable as part of a coating system for UV- and weather- resistance. Film thicknesses of approximately 200μm can be achieved in one step with optimal flow properties. RELEST Wind Gelcoat ca. RAL 7035, RA is characterised by its great adhesion to epoxy laminate.
    Lining
    Enviroline 376F-30LT
    Low Temperature Application and Cure Tank Lining.
    Primer-Finish
    Interzone 9545
    A two component, ultra-low VOC, fast curing, hybrid epoxy technology. As a heavy duty epoxy barrier coating formulated for single leg airless spray application Interzone 9545 is designed to provide long term corrosion protection in aggressive offshore environments. Approved to Norsok M-501 System 7A and 7B Interzone 9545 shows excellent corrosion resistance to abrasion and cathodic disbondment.
    Primer
    Intergard 7500
    A two component, high volume solids, abrasion resistant pure epoxy coating pigmented with aluminium that provides excellent long term anti-corrosive protection. Intergard 7500 is capable of fast cure and has low temperature cure properties. Ideally suited for use as a universal primer in protecting underwater areas, splashzones, decks and structural steel.
    Primer-Finish
    Intergard 3500
    Designed for use in the rail industry as a one coat direct-to-metal exterior finish or a primer for approved topcoats; Intergard 3500 has excellent edge retentive properties and provides a combination of anti-corrosive barrier protection and abrasion, chemical fume and spillage resistance. Intergard 3500 is formulated with ultra high solids, providing an option where regulations or customer preference require low VOCs and zero HAPs coatings
    Other
    RELEST Wind Leading Edge Cartridge
    RELEST Wind LEP Cartridge is a two-component solvent-free polyurethane coating which is especially designed for protecting the leading edge of rotor blades of wind energy plants from erosion damage caused by rain, sand, hail, dirt and other particles suspended in the air. The coating consists of an exceptionally fast, hard wearing, UV- and abrasion resistant polyurethane elastomer. It is supplied in a convenient 2-component cartridge for direct application of minimal quantities without weighing.
    Primer-Finish
    Interbuild 1073
    Interbuild 1073 is a two component, high solids content epoxy primer typically used in maintenance environments due to excellent surface tolerance properties. With a low VOC content, the primer can also be applied within internal environments and complies with the Indoor air quality standard as stipulated by EPA Method 24.
    Primer
    Interprime 1068
    Interprime 1068 is an air drying Zinc Phosphate Primer designed for application to all types of steel surfaces. This primer is characterised by good anti-corrosive properties, easy application and the ability to protect hand cleaned steel. Interprime 1068 is primarily intended as a single coat system for use in mildly corrosive environments, classified in ISO12944-2 as up to and including C2.
    Preconstruction Primer
    Interplate 408
    A two component iron oxide epoxy shop primer. Approved for welding by Newcastle Primary Care Trust (NOHA). Approved for welding by Lloyd's Register.
    Temporary Protection
    RELEST Wind ProcessCoat - I373-2050
    RELEST Wind ProcessCoat is a Solvent-free translucent 2K polyurethane for use as an in-mold gelcoat with low film thicknesses. Utilizing the new generation of UV absorbers allows for temporary outdoor storage of uncoated rotor blades, without the risk of UV light damaging the substrate. The product's great sandability facilitates the further treatment of demoulded rotor blades and forms an excellent, pore-free basis for subsequent coatings.
    Finish
    Intercryl 530 (Formerly Devcryl 1448)
    A premium quality, low VOC, direct to metal acrylic semi-gloss enamel for high traffic interior - exterior areas of commercial, institutional and industrial structures. *Please note this product is only available in North America.
    Other
    RELEST Wind Gelcoat - I372-7338
    RELEST Wind Gelcoat ca. RAL 7038, RA is a solvent free 2k viscoplastic, polyaspartic coating with excellent abrasion resistance. Suitable as part of a coating system for UV- and weather- resistance. Film thicknesses of approximately 200μm can be achieved in one step with optimal flow properties. RELEST Wind Gelcoat ca. RAL 7038, RA is characterised by its great adhesion to epoxy laminate.
    Filler
    RELEST Wind Putty Contour Cartridge - I373-3715
    RELEST Wind Putty Contour Cartridge is a Solvent-free, highly viscous polyurethane putty for smoothing surface and contour irregularities. Its easy sanding and rapid cure properties offers increased productivity for further processing and recoating. RELEST Wind Putty Contour is ideally situated for mechanical application. It is supplied in a convenient 2-component cartridge for direct application of minimal quantities without weighing.
    Intermediate
    RELEST Wind Gelcoat Transparent - I372-0002
    RELEST Wind Gelcoat Transparent is a viscoplastic, solvent-free polyaspartic coating with high tear propagation strength for use as an in-mould gelcoat. Suitable for making transparent, bubble-free and fast drying intermediate coats. RELEST Wind Gelcoat Transparent offers a pore-free surface after demoulding with very good UV stability allowing it to be topcoated without any additional working steps.
    Finish
    Interfine 2080HS
    A fast-drying, high performance, high solids isocyanate free and tin free hybrid polysiloxane finish. Interfine 2080HS combines both acrylic and epoxy resin technology to deliver high durability with added flexibility and offers excellent gloss and colour retention when compared to conventional acrylic and polyurethane finishes.  Being isocyanate-free and tin free can help to support the sustainability and HSE objectives of the contract chain - Interfine 2080HS does not produce di-isocyanates during onsite hot-work.
    1. 1

    Sorry, we couldn't find any results
    Fetching the data, please wait...