Lining
Interline 961
A two component, solvent based epoxy phenolic tank lining for application to both new steel, or lightly pitted surfaces.
BACK TO PRODUCTS
Onshore Oil and Gas Facilities
Product Applications
Our extensive product range is designed to increase service life and minimize unplanned shutdowns.
Filter by
Products
My Filters
Primer
Intergard 436
A two component clear epoxy sealer.Can be applied to slightly damp concrete. Cures quickly, long pot life. Excellent resistance to most alkalis, solvents, mild acids and water. Good toughness and resilience. Excellent binding properties to weathered fibrous cement sheeting.
Subsea, Abrasion Resistant and Splashzone
Interzone 762
A two component, styrene free, glass flake reinforced ambient cure polyester/acrylic copolymer coating.
Primer
Intergard 2511
A two component, low VOC, high solids, epoxy primer containing zinc phosphate anti-corrosive pigmentation.This primer's versatile application properties provide robust film thickness control as supplied, without the need to thin.
Chemical Resistant Lining
Ceilcote 140 Flakeline
Ceilcote 140 Flakeline is a heavy duty, glass flake reinforced, chemically resistant vinyl ester lining for protection of steel against aggressive chemicals in immersion service. Uses Ceilcote #2 Hardener.
Surface Pre-Treatment
Interplus 614
A single component, water based rust remover gel, which can be described as readily biodegradable as tested by OECD 301B CO2 Evolution test.
Finish
Interthane1022
A two component acrylic polyurethane finish giving excellent durability and long term recoatability
Reference
Ceilcote 165 Grout
Ceilcote 165 Grout is a carefully blended, three component vinyl
ester grout. It is designed for grouting pumps, vessels and equipment that are subjected to chemical exposure.
ester grout. It is designed for grouting pumps, vessels and equipment that are subjected to chemical exposure.
Intermediate
Interdur 8842
A two component, high solids, low VOC epoxy micaceous iron oxide coating formulated on proprietary polymer technology which provides rapid cure and overcoating even under low temperature conditions.
Other
Enviroline 405HTR MR System
Enviroline 405HTR MR is a reinforced chemcial resistant system. The system features a high temperature reesistant, 100% volume high solids, two component polycyclamine cured lining topcoat. Fibre glass mat reinforcement increases physical properties and where necessary allows dynamic crack bridging in concrete.In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
Primer-Finish
Intercure 3240G
A two component, gloss, low VOC, high solids, fast drying polyaspartic primer/finish coating. Intercure 3240G provides improved productivity at ambient temperature application whilst combining the anti-corrosive performance of epoxy coatings and high aesthetics of UV durable topcoats in a single coat application. Intercure 3240G is applied as a single coat direct to correctly prepared substrates using manual mix (single leg) or automatic mix (plural leg) application equipment, reducing application time, energy consumption and labour costs when compared to two coat applications, or single coat applications which require force drying at high temperature.
Lining
Interline 859
A two component, chemically resistant, high solids, high build epoxy phenolic tank lining providing static dissipation properties.