Lining
Enviroline 376F-60
A solvent free, two component polycyclamine cured lining system utilising advanced epoxy novolac technology with flake and fibre reinforcement.
BACK TO PRODUCTS
Onshore Oil and Gas Facilities
Product Applications
Our extensive product range is designed to increase service life and minimize unplanned shutdowns.
Filter by
Products
My Filters
Passive Fire Protection
Chartek 1960 CSP
Chartek 1960CSP intumescent material combined hydrocarbon fire protection and insulation against cryogenic liquid exposure.
Primer
Interdur 8802
A two component epoxy zinc phosphate/micaceous iron oxide primer, formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions. A high solids, low VOC product. CHINA ONLY
Passive Fire Protection
Interchar 1160
Interchar 1160 is a single component waterborne intumescent coating designed for onsite application. With zero VOC, Interchar 1160 offers a more environmentally friendly option for protection of structural steelwork, especially where aesthetics are important. Interchar 1160 is independently tested for up to 60 min fire in internal environments.
Finish
Intercryl 988
Single pack pure acrylic membrane coating designed to provide high quality cosmetic appearance with protection. It is also the preferred coating for sprayed polyurethane foam and is a long life finish coat over Intergard 436 on fibre cement roofing. Intercryl 988 has high volume solids, exhibits long term resistance to UV and atmospheric pollution and remains permanently flexible and elastic.
Primer
Interprime 484
Interprime 484 is an air drying Zinc Phosphate Primer designed for application to all types of steel surfaces.This primer is characterised by good anti-corrosive properties, easy application and the ability to protect hand cleaned steel.
Chemical Resistant Lining
Ceilcote 282AR Flakeline
Ceilcote 282AR Flakeline is a two component, vinyl ester, flake-filled, corrosion and abrasion resistant lining. Uses Ceilcote #2 Hardener.
Subsea, Abrasion Resistant and Splashzone
Interzone 2000
A very high solids, low VOC, two component ambient cure polyester containing a high level of chemically resistant glass flake which imparts properties of excellent corrosion, abrasion and chemical resistance.
Lining
Ceilcote 64 Lining
CEILCOTE 64 Lining is a heavy-duty lining that protects steel and concrete in immersion service from strong chemicals. The lining is formulated from polyester resin, inert fillers, and fiberglass reinforcement. It can withstand solution temperatures to 160°F (71°C) in immersion service.
Primer-Finish
Interbuild 1094
Interbuild 1094 is a pigmented, solvent free, self-smoothing, Epoxy overlay system designed to provide seamless protection of Concrete substrates from 0.5mm to 1mm. Interbuild 1094 will provide a gloss finish with excellent wear characteristics and abrasion resistance, high levels of chemical resistance and an easy to clean smooth finish.
Finish
Interthane 990UHS
A low VOC, two component acrylic polyurethane high performance finish coat with excellent gloss and colour retention on exterior exposure, for use over correctly prepared primed surfaces.International Paint also offers Interthane 990UHS in a mildew resistant, bright white finish. Contact your International Paint representative for additional information.