BACK TO PRODUCTS

Wind Power

Comprehensive Coating Solutions for Renewable Energy
  • Protect wind turbines from harsh environments.
  • Extend component lifespan from tip to toe.
  • Ensure compliance with industry standards.
     

EXPLORE CASE STUDIES

CASES

Protecting the World's Largest Offshore Wind Farm

Filter by

Products

125 Product Found
My Filters
    Filler
    RELEST Wind Putty Contour - I373-3615
    RELEST Wind Putty Contour 3K is a Solvent-free, highly viscous polyurethane putty for smoothing surface and contour irregularities. Its easy sanding and rapid cure properties offers increased productivity for further processing and recoating. RELEST Wind Putty Contour is ideally situated for manual application.
    Topcoat
    RELEST Wind HS Topcoat - I306-xxxx
    RELEST Wind HS Topcoat is a matt waterborne 2K acrylic polyurethane topcoat for use as a finishing coat on rotor blades. It offers quick drying for fast overcoating, even at high film thicknesses without the risk of blistering. It is suited for roller and spray applciaiton. RELEST Wind HS Topcoat has excellent UV and weathering resistance properties for long term protection and performance.
    Other
    RELEST Wind Gelcoat - I372-7235
    RELEST Wind Gelcoat ca. RAL 7035, RA is a solvent free 2k viscoplastic, polyaspartic coating with excellent abrasion resistance. Suitable as part of a coating system for UV- and weather- resistance. Film thicknesses of approximately 200μm can be achieved in one step with optimal flow properties. RELEST Wind Gelcoat ca. RAL 7035, RA is characterised by its great adhesion to epoxy laminate.
    Surface Tolerant
    RELEST Wind Putty Porefiller - I372-5915
    RELEST Wind Putty Porefiller is a 2K polyurethane for filling medium pinholes. UV- and weather- resistant with very fast drying properties and long workable life. It is compatible with all RELEST coating systems and can be recoated without sanding.
    Filler
    RELEST Wind Putty Contour - I373-9901
    RELEST Wind Putty Contour is a Solvent-free, highly viscous polyurethane putty for smoothing surface and contour irregularities. Its easy sanding and rapid cure properties offers increased productivity for further processing and recoating. RELEST Wind Putty Contour is ideally situated for mechanical application.
    Finish
    Devlac 1432
    A quick dry, corrosion resistant gloss enamel specially formulated for finishing metal products. *Please note this product is only available in North America.
    Other
    Interplus 4102 Odin Gel
    A single component, water-based rust remover / cleaner gel. Interplus 4102 Odin Gel is 100% biologically degradable, free for toxins and conforms to the yellow classification of the Harmonised Offshore Chemical Notification Format (HOCNF).
    Primer-Finish
    Interzone 9545
    A two component, ultra-low VOC, fast curing, hybrid epoxy technology. As a heavy duty epoxy barrier coating formulated for single leg airless spray application Interzone 9545 is designed to provide long term corrosion protection in aggressive offshore environments. Approved to Norsok M-501 System 7A and 7B Interzone 9545 shows excellent corrosion resistance to abrasion and cathodic disbondment.
    Filler
    RELEST Wind Putty Contour - I373-3715
    RELEST Wind Putty Contour is a Solvent-free, highly viscous polyurethane putty for smoothing surface and contour irregularities. Its easy sanding and rapid cure properties offers increased productivity for further processing and recoating. RELEST Wind Putty Contour is ideally situated for mechanical application. It is supplied in a convenient 2-component cartridge for direct application of minimal quantities without weighing.
    Primer
    Intergard 7500
    A two component, high volume solids, abrasion resistant pure epoxy coating pigmented with aluminium that provides excellent long term anti-corrosive protection. Intergard 7500 is capable of fast cure and has low temperature cure properties. Ideally suited for use as a universal primer in protecting underwater areas, splashzones, decks and structural steel.
    Other
    RELEST Wind Leading Edge Cartridge
    RELEST Wind LEP Cartridge is a two-component solvent-free polyurethane coating which is especially designed for protecting the leading edge of rotor blades of wind energy plants from erosion damage caused by rain, sand, hail, dirt and other particles suspended in the air. The coating consists of an exceptionally fast, hard wearing, UV- and abrasion resistant polyurethane elastomer. It is supplied in a convenient 2-component cartridge for direct application of minimal quantities without weighing.
    Finish
    RELEST Wind UHS Topcoat - I307-xxxx
    RELEST Wind UHS Topcoat is a two-component ultra-high solid topcoat for rotor blades of wind energy plants and is characterised by its excellent weather and rain erosion resistance.
    Filler
    RELEST Wind Putty Protect TEC - I373-4015
    RELEST Wind Putty Protect TEC is a two-component viscoplastic, solvent-free, fast curing and easy to sand polyurethane filler for smoothing surface and contour irregularities. RELEST Wind Putty Protect TEC is especially designed for protecting the leading edge of rotor blades of wind energy plants from erosion damage caused by rain, sand, hail, dirt and other particles suspended in the air.
    Other
    RELEST Wind Leading Edge - I374-0735
    RELEST Wind LEP is a two-component solvent-free polyurethane coating which is especially designed for protecting the leading edge of rotor blades of wind energy plants from erosion damage caused by rain, sand, hail, dirt and other particles suspended in the air. The coating consists of an exceptionally fast, hard wearing, UV- and abrasion resistant polyurethane elastomer.
    Primer-Finish
    Devthane 359
    A high build, high performance, two-component chemically-cured aliphatic urethane gloss finish. *Please note this product is only available in North America.
    1. 1

    Sorry, we couldn't find any results
    Fetching the data, please wait...