Finish
Interlac 800
A sing component, high solids, low VOC, 30% silicone content, modified alkyd
BACK TO PRODUCTS
Wind Power
Comprehensive Coating Solutions for Renewable Energy
- Protect wind turbines from harsh environments.
- Extend component lifespan from tip to toe.
- Ensure compliance with industry standards.
Filter by
Products
My Filters
Filler
RELEST Wind Putty Contour - I373-3615
RELEST Wind Putty Contour 3K is a Solvent-free, highly viscous polyurethane putty for smoothing surface and contour irregularities. Its easy sanding and rapid cure properties offers increased productivity for further processing and recoating. RELEST Wind Putty Contour is ideally situated for manual application.
Passive Fire Protection
Chartek 1960 CSP
Chartek 1960CSP intumescent material combined hydrocarbon fire protection and insulation against cryogenic liquid exposure.
Topcoat
RELEST Wind HS Topcoat - I306-xxxx
RELEST Wind HS Topcoat is a matt waterborne 2K acrylic polyurethane topcoat for use as a finishing coat on rotor blades. It offers quick drying for fast overcoating, even at high film thicknesses without the risk of blistering. It is suited for roller and spray applciaiton. RELEST Wind HS Topcoat has excellent UV and weathering resistance properties for long term protection and performance.
Temperature Resistance
Intertherm 891
A one component, general purpose heat resistant paint, based on air drying oleoresinous resins, and pigmented with aluminium flake.
Primer-Finish
Intergard 452
Intergard 452 is a two component, high build epoxy intermediate. Pigmented with micaceous iron oxide to comply with the requirements of BS5493:1977
Finish
Interbuild 1003
Interbuild 1003 is a high performance, two component epoxy primer with excellent chemical and abrasion resistance properties. Interbuild 1003 is especially suited for mechanically prepared concrete substrates or porous substrates that prone to weakness, due to excellent penetration and high adhesion properties.
Other
RELEST Wind Gelcoat - I372-7235
RELEST Wind Gelcoat ca. RAL 7035, RA is a solvent free 2k viscoplastic, polyaspartic coating with excellent abrasion resistance. Suitable as part of a coating system for UV- and weather- resistance. Film thicknesses of approximately 200μm can be achieved in one step with optimal flow properties. RELEST Wind Gelcoat ca. RAL 7035, RA is characterised by its great adhesion to epoxy laminate.
Surface Tolerant
RELEST Wind Putty Porefiller - I372-5915
RELEST Wind Putty Porefiller is a 2K polyurethane for filling medium pinholes. UV- and weather- resistant with very fast drying properties and long workable life. It is compatible with all RELEST coating systems and can be recoated without sanding.
Primer-Finish
Interbuild 1094
Interbuild 1094 is a pigmented, solvent free, self-smoothing, Epoxy overlay system designed to provide seamless protection of Concrete substrates from 0.5mm to 1mm. Interbuild 1094 will provide a gloss finish with excellent wear characteristics and abrasion resistance, high levels of chemical resistance and an easy to clean smooth finish.
Preconstruction Primer
Interplate 855
A two pack, zinc silicate shop (pre-construction) primer providing good corrosion protection even after heating up to 800°C (1472°F) and resistance to damage caused by welding, gas cutting and fairing. Suitable for fast welding processes and offers control of secondary surface preparation requirements.
Topcoat
RELEST Wind WB Topcoat LI - I394-x8xx
RELEST Wind WB Topcoat LI is a waterborne 2K acrylic polyurethane topcoat for use as a finishing coat on rotor blades. It is fast drying and allows for rapid recoating even at high film thicknesses without the risk of blistering. RELEST Wind WB Topcoat LI offers excellent UV and weathering resistance.
Passive Fire Protection
Interchar 1120HY
A single component, borate and chlorine free, water borne intumescent coating designed for on-site application to interior exposed structural steel requiring protection from cellulosic fire. Interchar 1120HY is a low VOC acrylic intumescent material independently fire tested for up to 3 hour fire ratings in accordance with ASTM E119/UL263.
Filler
RELEST Wind Putty Contour - I373-9901
RELEST Wind Putty Contour is a Solvent-free, highly viscous polyurethane putty for smoothing surface and contour irregularities. Its easy sanding and rapid cure properties offers increased productivity for further processing and recoating. RELEST Wind Putty Contour is ideally situated for mechanical application.