We are a single source supplier of coatings for wind turbines - from tip to toe.
A single component, high temperature coating based on a moisture-curing silicone binder, Intertherm 50 is ideal for the protection of steel from corrosion at temperatures up to 540°C (1004°F). The moisture-curing crosslinking technology of Intertherm 50 allows multiple coats to be applied without heat curing.
A single component, temperature resistant finish coating, Intertherm 875 is based on silicone and acrylic resins with thermally stable pigmentation. Intertherm 875 does not require heating between coats and it is suitable for steelwork operating at temperatures up to 260°C (500°F) in a wide range of industrial environments.
A two component, metallic zinc rich epoxy primer formulated to provide fast drying, rapid handling properties and excellent abrasion resistance.
Interzinc 42 is a high quality general purpose two component epoxy zinc primer designed for use in maintenance and new construction. Containing 50% zinc, Interzinc 42 is recommended as part of an anticorrosive coating system for structures in a wide range of industries
Containing 80% zinc, Interzinc 52 is a high performance two component zinc-rich epoxy primer with excellent application properties. Interzinc 52 complies with SSPC Paint 20 Level 2 and has been designed to provide maximum protection as part of an anticorrosive coating system for steel in aggressive environments in both maintenance and new construction situations
A two component, low VOC, water borne alkali metallic zinc silicate primer.
A two component, metallic zinc rich epoxy primer, designed to provide excellent corrosion resistance both as a single coat and as a primer for a high performance coating system. Contains 90% zinc by weight in the dry film.
With proven track record spanning over 30 years, low VOC Interzone 1000 is a high build, two component epoxy coating pigmented with lamellar glass flake. Interzone 1000 extends asset lifetime by providing outstanding abrasion and corrosion resistance to steelwork located in the harshest offshore environments. Interzone 1000 can also be used in deck coating systems with appropriate aggregate.
An ultra-high build, high volume solids, two component catalysed epoxy, Interzone 485 is ideal for the long term protection of steelwork in severe environments where high abrasion and corrosion resistance are required. Interzone 485 provides excellent resistance to alkalis, chemicals and petroleum products, and when used in conjunction with appropriate aggregate, it provides a tough, durable non-slip deck system.
A high solids, low VOC, high build glass flake epoxy, Interzone 505 is a tough, fast drying primer that provides excellent long term anticorrosive and abrasion protection. Interzone 505 is designed for the protection of steelwork in severe corrosive environments, such as splash zones, pilings and chemical plants. NOTE: Interzone 505 will no longer be manufactured in 2022. The product is being phased out with Interzone 954GF as its replacement. Built on the track record of Interzone 954, Interzone 954GF has application and performance benefits when compared to Interzone 505.
Corrosion & fire protection coatings for buildings
Coatings for abrasive and corrosive environments
Coatings & fire protection for upstream oil & gas
Coatings & fire protection for downstream oil & gas