Lining
Enviroline 376F-30LT
Low Temperature Application and Cure Tank Lining.
Filter by
Products
My Filters
Lining
Ceilcote 282HB Flakeline
Ceilcote 282HB Flakeline has excellent resistance to hot flue gas environments. The coating system can achieve a dry film thickness of up to 1350 microns (54 mils) in a single coat with or without the use of a primer. The intent is to eliminate one application step where similar coating systems require two seperate applications. Ceilcote 282HB Flakeline is normally applied on metal surfaces with proper surface preparation.
Lining
Ceilcote 68 Lining
Ceilcote 68 Lining is a fibreglass reinforced, toughened epoxy lining system developed for protection of concrete and steel surfaces that are subjected to immersion and corrosive chemical environments.
Lining
Devchem 253HS
A high solids, one coat, chemical resistant lining system with exceptional resistance to a wide range of chemicals and solvents.
Lining
Enviroline 399ABR
A very high solids, thick-film, fast curing, single coat advanced hybrid epoxy system designed exclusively to provide high abrasion resistance.
Lining
Interbuild 1004
Interbuild 1004 is a high performance, two component epoxy primer with excellent chemical and abrasion resistance. It exhibits good penetration properties to ensure good adhesion on concrete floors. Interbuild 1002 is especially suited for properly prepared concrete substrates.
Lining
Interbuild 1071
Interbuild 1071 is a two component, solvent free, heavy duty epoxy floor coating. It is a self smoothing, easy to apply product, leaving a seamless surface. It has excellent chemical, abrasion and impact resistance designed as part of a thin film coating system.
Lining
Enviroline 405HT LV
Enviroline 405HT LV is a 100 g/l VOC compliant ultra high solid, low viscosity version of Enviroline 405HT. Specifically designed for airless spray application equipment used to line interior pipe and where both outstanding abrasion resistance and excellent high temperature service performance are required.
Lining
Enviroline 405HT BR
Enviroline 405HT BR is an ultra high solids brush grade version of Enviroline 405HT and is specifically designed for stripe coat application over welds and seams in tanks that require excellent heat resistance with outstanding corrosion protection.
Lining
Interline 961
A two component, solvent based epoxy phenolic tank lining for application to both new steel, or lightly pitted surfaces.
Lining
Enviroline 3910
Designed for use in the rail market as a lining for the protection of ferrous substrates where transportation and storage of a broad range of commodities are required. It is suitable for use in rail cars, including jumbo hopper cars, intended to transport and store plastic pellets and dry bulk products.