Lining
Enviroline 125U
A solvent free, two component, reinforced polycyclamine cured lining system utilising advanced epoxy novolac technology.
Filter by
Products
My Filters
Lining
Enviroline 405HT BR
Enviroline 405HT BR is an ultra high solids brush grade version of Enviroline 405HT and is specifically designed for stripe coat application over welds and seams in tanks that require excellent heat resistance with outstanding corrosion protection.
Lining
Interbuild 1004
Interbuild 1004 is a high performance, two component epoxy primer with excellent chemical and abrasion resistance. It exhibits good penetration properties to ensure good adhesion on concrete floors. Interbuild 1002 is especially suited for properly prepared concrete substrates.
Lining
Interbuild 1071
Interbuild 1071 is a two component, solvent free, heavy duty epoxy floor coating. It is a self smoothing, easy to apply product, leaving a seamless surface. It has excellent chemical, abrasion and impact resistance designed as part of a thin film coating system.
Lining
Enviroline 405HT LV
Enviroline 405HT LV is a 100 g/l VOC compliant ultra high solid, low viscosity version of Enviroline 405HT. Specifically designed for airless spray application equipment used to line interior pipe and where both outstanding abrasion resistance and excellent high temperature service performance are required.
Lining
Enviroline 376F-60
A solvent free, two component polycyclamine cured lining system utilising advanced epoxy novolac technology with flake and fibre reinforcement.
Lining
Enviroline 405HTR
Enviroline 405HTR offers high temperature performance alongside a wide ranging chemical resistance, for increased operational flexibility. Formulated with innovative polycyclamine technology, Enviroline 405HTR is a low VOC novolac epoxy lining that allows rapid return to service in just 14 hours, minimizing process disruption and reducing overall installation costs. Enviroline 405HTR offers high temperature resistance to 150°C (302°F) in a variety of cargoes including crude oil and produced water.
Lining
Enviroline 376F-30
A solvent free, two component polycyclamine cured lining system utilising advanced epoxy novolac technology.
Lining
Ceilcote 64 Lining
CEILCOTE 64 Lining is a heavy-duty lining that protects steel and concrete in immersion service from strong chemicals. The lining is formulated from polyester resin, inert fillers, and fiberglass reinforcement. It can withstand solution temperatures to 160°F (71°C) in immersion service.
Lining
Ceilcote 282HB Flakeline
Ceilcote 282HB Flakeline has excellent resistance to hot flue gas environments. The coating system can achieve a dry film thickness of up to 1350 microns (54 mils) in a single coat with or without the use of a primer. The intent is to eliminate one applic ation step where similar coating systems require two seperate applications. Ceilcote 282HB Flakeline is normally applied on metal surfaces with proper surface preparation. Uses Ceilcote #2 Hardener.