Lining
Ceilcote 242MR System
BACK TO PRODUCTS
All Products
Filter by
Products
My Filters
Chemical Resistant Lining
Ceilcote 242LSE flakeline
CEILCOTE 242 LSE Flakeline coating is a low surface energy, flake filled, catalyzed vinyl ester system with excellent resistance to organic and inorganic acid solutions and many aliphatic solvents.
Lining
Ceilcote 68 Lining
Ceilcote 68 Lining is a fibreglass reinforced, toughened epoxy lining system developed for protection of concrete and steel surfaces that are subjected to immersion and corrosive chemical environments.
Reference
Ceilcote EJ-10
CEILCOTE EJ10 is a two part rubberised asphalt compound designed for sealing joints and cracks in concrete, and as an expansion joint for Ceilcote floors. It is recommended for dilute acid and alkaline solutions, but is known to resist strong solutions of some chemicals. It is available in a pourable version and a trowelable version.
Reference
Ceilcote EJ-11
Ceilcote EJ11 joint sealant system is a two component, chemical-resistant fluorelastomer compound designed as an expansion joint for linings and floorings as well as for sealing joints and cracks in concrete.
Reference
Ceilcote EJ-3
Ceilcote EJ3 is a two component, pourable polysulfide elastomer designed for use in applications requiring a chemical resistant sealant for horizontal joints. Ceilcote EJ4 is trowel grade, for use on vertical and overhead surfaces. When cured Ceilcote EJ3/EJ4 forms a tight fitting synthetic rubber compound to effectively seal out water and many aggressive chemical solutions
Lining
Ceilcote 222HB Flakeline
Ceilcote 222HB is designed for use on FGD duct linings, tanks, trenches and pits, vaults and dikes, secondary containment and floors.
Chemical Resistant Lining
Ceilcote 242GF Flakeline
Ceilcote 242GF Flakeline is a vinyl ester resin system with graphite fillers, which exhibits excellent resistance to organic and inorganic acid solutions, hot caustic, and oxidizing bleach solutions. It provides excellent resistance to hydrofluoric acid. Ceilcote 242GF Flakeline can be used where electrical conductivity is required.
Reference
Ceilcote EJ-4
Ceilcote EJ3 is a two component, pourable polysulfide elastomer designed for use in applications requiring a chemical resistant sealant for horizontal joints. Ceilcote EJ4 is trowel grade, for use on vertical and overhead surfaces. When cured Ceilcote EJ3/EJ4 forms a tight fitting synthetic rubber compound to effectively seal out water and many aggressive chemical solutions
Primer
Ceilcote 380
Ceilcote 380 is a catalysed vinyl ester primer for concrete and steel substrates. It provides excellent bonding and adhesion for various polyester or vinyl ester linings, coating and flooring systems as well as Ceilcote Hybrid Polymer systems. The addition of Ceilcote C#1 powder provides conductivity where required.
Grout
Ceilcote 748 Corrosion Grout
CEILCOTE 748 Corrosion Grout is a three-component chemicalresistant epoxy grouting material. It provides high strength, good adhesion to concrete and steel, minimal shrinkage and resists degradation by corrosive chemicals.
Reference
Ceilcote 610 Ceilpatch
Ceilcote 610 Ceilpatch is a chemical-resistant epoxy patching/filling compound that is used to fill defects in concrete or steel surfaces prior to the application of Ceilcote lining, coating or flooring systems. It provides excellent adhesion to concrete or steel, minimal shrinkage and superior chemical resistance.