43 ProductsShare product selection
Ceilcote 6640 Ceilcrete
Ceilcote 6640 Ceilcrete
Ceilcote 6650 Ceilcrete
Ceilcote 6650 Ceilcrete is a trowel-applied novolac vinyl ester system designed specifically for the protection of steel and concrete against corrosive chemicals. The system includes a synthetic or fibreglass reinforcing layer.Ceilcote 6650 Ceilcrete exhibits excellent resistance to a wide range of solvents, chlorinated aromatics and aliphatics.
Ceilcote 680 Primer
Ceilcote 680 Primer is a low viscosity epoxy primer for steel and concrete, with low temperature cure and a degree of tolerance to surface moisture.
Ceilcote 680M Primer/Saturant is a low viscosity, 85% volume solids epoxy compound based on a unique adduct curing technology. This provides tolerance of surface moisture at temperatures down to 2ºC (32ºF) and the ability to cure in the presence of moisture. The addition of Ceilcote C#1 Powder provides conductivity where required.
Ceilcote 686C Primer
CEILCOTE 686C primer is a conductive epoxy primer for application on concrete surfaces. When used, it overcomes the variable resistance of the concrete substrate and provides a conductive film under CEILCOTE epoxy systems so that the system can be tested for holidays (pinholes) with a high voltage detector.
Ceilcote 74 Lining
Ceilcote 74 Lining is a trowel applied heavy duty lining that protects steel and concrete in immersion service from strong chemicals.
Ceilcote 748 Corrosion Grout
CEILCOTE 748 Corrosion Grout is a three-component chemicalresistant epoxy grouting material. It provides high strength, good adhesion to concrete and steel, minimal shrinkage and resists degradation by corrosive chemicals.
Ceilcote 749DP Corrosion Grout
CEILCOTE 749DP Grout is a three-component chemical-resistant epoxy grouting material designed for virtually unlimited pour depths. It provides high flowability, high strength, good adhesion to concrete and steel, resists degradation by corrosive chemicals and does not compromise strength.
Ceilcote 800 Coroline
CEILCOTE 800 Coroline lining is a heavy duty, monolithic flooring/lining system that is designed to protect concrete and metal against attack by corrosive chemicals and mechanical abuse. Based on novolac epoxy technology, CEILCOTE 800 Coroline lining provides exceptional resistance to 98% Sulfuric Acid, Sodium Hydroxide and other aggressive chemicals.
Ceilcote 810 Corocrete
The CEILCOTE 810 Corocrete floor system is designed with heavy duty, epoxy novolac surface texture material. Abrasive grits are broadcast into the resin matrix to provide traction, textured finish, durability and wear. The flooring system is designed for resisting attack by aggressive chemicals such as concentrated sulfuric acid.