Devgrip 238 is a two component, abrasion resistant epoxy coating. *Please note this product is only available in North America.
Finish
Interlac 800
A sing component, high solids, low VOC, 30% silicone content, modified alkyd
Finish
Devthane 379N
A low VOC, two component modified acrylic polyurethane finish giving excellent durability and long-term recoatability, for use over correctly prepared primed surfaces. This product is also HAPS free and exempt solvent free.
Finish
Devcryl 1449
A single component water borne finish formulated on weather resistant acrylic copolymer technology. *Please note this product is only available in North America.
Finish
Interbuild 1003
Interbuild 1003 is a high performance, two component epoxy primer with excellent chemical and abrasion resistance properties. Interbuild 1003 is especially suited for mechanically prepared concrete substrates or porous substrates that prone to weakness, due to excellent penetration and high adhesion properties.
Finish
Interbuild 1091
Interbuild 1091 is a two component isocyanate cured polyurethane coating. It is a high performance, nonyellowing product. It is easy to apply. This product is tintable in a wide range of colours. It has excellent gloss and colour retention. It has good chemical, abrasion and impact resistance. If enhanced slip resistance is required GM Non Slip can be used in the system. To be used as topcoat in atmospheric environments. Interbuild 1091 is best suited for light traffic areas.
Finish
Devlac 1432
A quick dry, corrosion resistant gloss enamel specially formulated for finishing metal products. *Please note this product is only available in North America.
Finish
Devran 229V
A low VOC, high performance, two component, isocyanate free crosslinking acrylic finish which provides good durability in terms of colour and gloss retention. *Please note this product is only available in North America.
Finish
Devthane 389H
A high performance, low VOC, two-component chemically-cured aliphatic urethane gloss finish. *Please note this product is only available in North America.
Finish
Devlac 1433
A quick drying, high gloss alkyd enamel available in a wide range of colours. *Please note this product is only available in North America.
Finish
RELEST Wind UHS Topcoat - I307-xxxx
RELEST Wind UHS Topcoat is a two-component ultra-high solid topcoat for rotor blades of wind energy plants and is characterised by its excellent weather and rain erosion resistance.
Finish
Interthane 4379
A high performance, two-component chemically-cured aliphatic polyurethane gloss finish for use in areas where maximum gloss and colour retention are required.
Finish
Interfine 2700
Direct-to-Metal epoxy polysiloxane finish
Finish
Devlac 1431
A single component alkyd gloss enamel finish. *Please note this product is only available in North America.
Primer-Finish
Devthane 389N
A high performance, two-component chemically-cured aliphatic urethane gloss finish. *Please note this product is only available in North America.