BACK TO PRODUCTS

Passive Fire Protection

Speciality Coating

CASES

Fireproofing an offshore giant

Filter by

Products

26 Product Found
My Filters
    Passive Fire Protection
    Interkote SFR
    Interkote SFR is a single-component, fiber-reinforced, high-build structural fire repair mortar, designed for efficient and cost-effective repairs of damaged or compromised concrete or light weight cementitious passive fire protection. 
    Passive Fire Protection
    Interchar 3120
    Interchar 3120 provides thin and thick film capabilities, easy to apply and durable epoxy intumescent coating that provides cellulosic passive fire protection (PFP) for off site applied structural steel. It increases production efficiency, reduces site work and coating schedules.
    Passive Fire Protection
    Chartek 8E
    Boron-free Chartek 8E provides exceptional pool fire performance with up to 30% lower installed weight compared to alternative PFP products, allowing for greater flexibility in structural design. It improves coating efficiency through reduced number of coats and no mesh requirement for up to 60 minutes pool fire duration.
    Passive Fire Protection
    Chartek 1960 CSP
    Chartek 1960CSP intumescent material combined hydrocarbon fire protection and insulation against cryogenic liquid exposure.
    Passive Fire Protection
    Interchar 1160
    Interchar 1160 is a single component waterborne intumescent coating designed for onsite application. With zero VOC, Interchar 1160 offers a more environmentally friendly option for protection of structural steelwork, especially where aesthetics are important. Interchar 1160 is independently tested for up to 60 min fire in internal environments.
    Passive Fire Protection
    Chartek 7E
    A self-reinforced epoxy coating, Chartek 7E simplifies application giving the oil and gas industry more choice and greater efficiency than ever before. Chartek 7E offers outstanding pool and jet fire resistance for up to two hours and a significant reduction in installed weight against other PFP products in the market.
    Passive Fire Protection
    Interchar 1120
    Interchar 1120 will maintain architectural aesthetics for fire resistance periods up to 120 minutes and it is independently tested for up to three hour fire resistance. Interchar 1120 is a single component, low VOC waterborne intumescent coating designed for onsite application to interior exposed structural steel.
    Passive Fire Protection
    Interchar 2060
    Interchar 2060 provides 60 minutes fire protection via single coat application while maintaining architectural aesthetics. It is a class leading single component, low VOC intumescent coating suitable for onsite and offsite application. Tested and certified to the highest standards, Interchar 2060 offers rapid drying times for fast handling and throughput.
    Passive Fire Protection
    Interchar 1120HY
    A single component, borate and chlorine free, water borne intumescent coating designed for on-site application to interior exposed structural steel requiring protection from cellulosic fire. Interchar 1120HY is a low VOC acrylic intumescent material independently fire tested for up to 3 hour fire ratings in accordance with ASTM E119/UL263.
    Passive Fire Protection
    Chartek 7
    With an unrivalled track record spanning more than 20 years, Chartek 7 provides exceptional protection for long duration pool and jet fires, and proven long term corrosion resistance. It is the most widely certified epoxy intumescent in the world and has protected over six million square meters of steel globally.
    Passive Fire Protection
    Interchar 404
    The fast drying properties and rapid recoatability of Interchar 404 lead to improved productivity while maintaining architectural aesthetics. Interchar 404 is a single component, solvent-based intumescent coating offering up to 120 minutes fire resistance to structural steelwork in accordance to EN 13381-8.
    Passive Fire Protection
    Interkote 1560
    Interkote 1560 is a cementitious passive fire protection (PFP) coating, ideally suited for onshore facilities where onsite application of cement-based PFP is preferred. Formulated with bauxite, it provides durable, cost-effective fire resistance in accordance with the UL 1709 standard
    Passive Fire Protection
    Chartek 1620CSP
    Chartek 1620CSP is a unique intumescent material that provides combined hydrocarbon fire protection and insulation when exposed to cryogenic liquids. A high build, solvent-free, two component epoxy, Chartek 1620CSP also provides excellent corrosion protection and blast resistance.
    Passive Fire Protection
    Chartek 1709
    Part of our UL 1709 product offer, boron-free Chartek 1709 provides long term corrosion and fire protection in a single system. Having covered millions of square meters over a period of 10 years, Chartek 1709 can be used with confidence for pool fires up to four hours, jet fires and vessel protection. Its low installed weight and excellent application properties make Chartek 1709 the ideal choice for modular construction or site application.
    Passive Fire Protection
    Chartek 2218
    Chartek 2218 is our latest epoxy PFP system for installations requiring certification to the UL 1709 standard. Using patented technology, it offers our lowest certified thickness for longer duration fires. Boron-free Chartek 2218 is certified for up to four hours pool fire protection in addition to being jet fire tested. Simplified installation and unique rapid cure, even at low temperatures, enable faster application, improve production rates and reduce overall costs.
    1. 1

    Sorry, we couldn't find any results
    Fetching the data, please wait...