13 ProductsShare product selection
Interbond 1202UPC is a universal pipe coating that provides external protection for above ground piping and accessories operating between -196ºC (-321ºF) and 650ºC (1202ºF). Interbond 1202UPC provides long term corrosion protection, as well as excellent resistance to corrosion under insulation (CUI).
Interbond 2340UPC is a universal pipe coating that provides external protection for process piping, valve and vessels operating between -196°C (-321°F) and 230°C (446°F), as well corrosion performance in accordance with the ISO12944-9 standard at ambient temperatures.
A two component, high temperature resistant topcoat based on inorganic silicate technology.
A single component, intermediate temperature finish based on temperature resistant silicone and acrylic resins with thermally stable pigmentation.Intertherm 1875has excellent brush and roll characteristics.
A highly crosslinked, two component, high build epoxy phenolic coating, Intertherm 228HS combines properties of corrosion and chemical resistance when used in high temperature service. Based upon novolac resin technology, Intertherm 228HS can be used in a wide range of highly corrosive environments operating at temperatures up to 230°C (446°F).
Designed specifically for the subsea market, Intertherm 3070 is a two component phenolic epoxy novolac with excellent high temperature resistance and compatibility with cathodic protection.
A single component, spray applied insulation coating based upon waterborne acrylic technology, Intertherm 3350 is suitable for use on substrates operating up to 177°C (350°F). Combining superior thin film insulation performance with easy application, Intertherm 3350 can improve productivity and minimize energy loss.
A single component, high temperature coating based on a moisture-curing silicone binder, Intertherm 50 is ideal for the protection of steel from corrosion at temperatures up to 540°C (1004°F). The moisture-curing crosslinking technology of Intertherm 50 allows multiple coats to be applied without heat curing.
A functional coating for identification of hot spots and internal insulation failures, Intertherm 715 exhibits a visual color change in response to temperature rise.
Supplied as a single component, fibre reinforced, high build cement based repair mortar.Requires the addition of clean water at site. *Selective Countries Only - Please contact your local representative.