Buildings

Product Applications

Our coatings ensure that the world’s structures retain their safety, impact and design credentials for many years to come.

Filter by

Product Chemistry

Volume Solids

VOC(EPA Solvent)

Gloss Level

Number of Components

Attributes

Fire Type

Certifications

Fire Duration (minutes)

Water and Waste

Mining

Transportation and Pipeline

Buildings

Wind Power

Thermal Power

Onshore Oil and Gas facilities

Offshore Oil and Gasfacilities

Product Line

Range

Dry time

Low temperature Cure (5 Celsius)

Structural Repair

Temperature Resistance

Lining

Passive Fire Protection

330 Products

Intertherm 181

Product Type
Temperature Resistance
Chemistry
Inorganic Silicate

A two component, high temperature resistant topcoat based on inorganic silicate technology.

Intertherm 50

Product Type
Temperature Resistance
Chemistry
High Temperature Silicone

A single component, high temperature coating based on a moisture-curing silicone binder, Intertherm 50 is ideal for the protection of steel from corrosion at temperatures up to 540°C (1004°F). The moisture-curing crosslinking technology of Intertherm 50 allows multiple coats to be applied without heat curing.

Intertherm 715

Product Type
Temperature Resistance
Chemistry
Modified Silicone

A functional coating for identification of hot spots and internal insulation failures, Intertherm 715 exhibits a visual color change in response to temperature rise. Based upon modified silicone technology, Intertherm 715 is a single component coating ideal for use on reaction vessels on chemical and petrochemical sites as a warning of dangerous temperature increases.

Intertherm 875

Product Type
Temperature Resistance
Chemistry
High Temperature Silicone Acrylic

A single component, temperature resistant finish coating, Intertherm 875 is based on silicone and acrylic resins with thermally stable pigmentation. Intertherm 875 does not require heating between coats and it is suitable for steelwork operating at temperatures up to 260°C (500°F) in a wide range of industrial environments.

Interzinc 109

Product Type
Primer
Chemistry
Epoxy Zinc-Rich

A two component, metallic zinc rich epoxy primer formulated to provide fast drying, rapid handling properties and excellent abrasion resistance.

Interzinc 22HS

Product Type
Primer
Chemistry
Inorganic Zinc Rich Silicate

A low VOC, inorganic zinc-rich ethyl silicate based primer providing outstanding corrosion protection for properly prepared steel surfaces. Contains 82% zinc dust in the dry film for long term corrosion protection.

Interzinc 315

Product Type
Primer
Chemistry
Rapid Recoat Epoxy Zinc Rich

A two component high solids, low VOC metallic zinc-rich epoxy primer formulated on proprietary polymer technology which provides rapid cure and overcoating even under low temperature conditions.Interzinc 315 uses zinc dust conforming to the requirements of ASTM D520 Type II as a minimum standard.

Interzinc 42

Product Type
Primer
Chemistry
Epoxy-Zinc

Interzinc 42 is a high quality general purpose two component epoxy zinc primer designed for use in maintenance and new construction. Containing 50% zinc, Interzinc 42 is recommended as part of an anticorrosive coating system for structures in a wide range of industries

Interzinc 52

Product Type
Primer
Chemistry
Epoxy Zinc-Rich

Containing 80% zinc, Interzinc 52 is a high performance two component zinc-rich epoxy primer with excellent application properties. Interzinc 52 complies with SSPC Paint 20 Level 2 and has been designed to provide maximum protection as part of an anticorrosive coating system for steel in aggressive environments in both maintenance and new construction situations

Interzinc 697

Product Type
Primer
Chemistry
Inorganic Zinc Silicate

A two component, low VOC, water borne alkali metallic zinc silicate primer.

Pages