Offshore Oil and Gas

Product Applications

We offer a complete coating solution range for the most demanding offshore environments around the world.

Filter by

Products

185 Product Found
My Filters
    Reference
    Ceilcote 165 Grout
    Ceilcote 165 Grout is a carefully blended, three component vinylester grout. It is designed for grouting pumps, vessels and equipment that are subjected to chemical exposure.
    Primer-Finish
    Intercure 3240G
    A two component, gloss, low VOC, high solids, fast drying polyaspartic primer/finish coating. Intercure 3240G provides improved productivity at ambient temperature application whilst combining the anti-corrosive performance of epoxy coatings and high aesthetics of UV durable topcoats in a single coat application. Intercure 3240G is applied as a single coat direct to correctly prepared substrates using manual mix (single leg) or automatic mix (plural leg) application equipment, reducing application time, energy consumption and labour costs when compared to two coat applications, or single coat applications which require force drying at high temperature.
    Primer
    Intergard 235
    A high build, high solids, low VOC two component epoxy primer.
    Lining
    Ceilcote 64 Lining
    CEILCOTE 64 Lining is a heavy-duty lining that protects steel and concrete in immersion service from strong chemicals. The lining is formulated from polyester resin, inert fillers, and fiberglass reinforcement. It can withstand solution temperatures to 160°F (71°C) in immersion service.
    Chemical Resistant Lining
    Ceilcote 242LSE flakeline
    CEILCOTE 242 LSE Flakeline coating is a low surface energy, flake filled, catalyzed vinyl ester system with excellent resistance to organic and inorganic acid solutions and many aliphatic solvents.
    Passive Fire Protection
    Interchar 1120HY
    A single component, borate and chlorine free, water borne intumescent coating designed for on-site application to interior exposed structural steel requiring protection from cellulosic fire. Interchar 1120HY is a low VOC acrylic intumescent material independently fire tested for up to 3 hour fire ratings in accordance with ASTM E119/UL263.
    Primer
    Interzone 1020
    A two component, glass flake reinforced ambient cure isophthalic polyester coating.
    Primer
    Interplate 837HS
    A two pack heat resistant ceramic zinc silicate anti-corrosive primer. Suitable for controlled cathodic protection.
    Other
    Interplus 4102 Odin Gel
    A single component, water-based rust remover / cleaner gel. Interplus 4102 Odin Gel is 100% biologically degradable, free for toxins and conforms to the yellow classification of the Harmonised Offshore Chemical Notification Format (HOCNF).
    Passive Fire Protection
    Interkote 1560
    Interkote 1560 is a cementitious passive fire protection (PFP) coating, ideally suited for onshore facilities where onsite application of cement-based PFP is preferred. Formulated with bauxite, it provides durable, cost-effective fire resistance in accordance with the UL 1709 standard
    Intermediate
    Intergard 2005
    A two component high build epoxy semi gloss finish.
    Chemical Resistant Lining
    Ceilcote 242HT Flakeline
    Ceilcote 242HT Flakeline is a glass flake filled, catalyzed vinyl ester system with excellent resistance to organic and inorganic acid solutions and many aliphatic solvents.
    Surface Pre-Treatment
    Interplus 546
    A single component solvent based cleaner/degreaser, which can be described as readily biodegradable as tested by OECD 301B CO2 Evolution test.
    Lining
    Enviroline 399PTFE
    Enviroline 399PTFE is a high solids, thick-film single coat advanced hybrid epoxy system that reduces the coefficient of friction to allow smoother, easier loading of slurry and dry products.
    Surface Tolerant
    Interplus 770
    A low VOC, two component, high solids, internally flexibilised, surface tolerant epoxy primer/intermediate.
    Fetching the data, please wait...