BACK TO PRODUCTS

Offshore Oil and Gas

Complete Coating Solutions for Harsh Offshore Environments

  • Protect assets from corrosion and extreme conditions.
  • Enhance safety with proven fireproofing.
  • Minimize maintenance with durable coatings.
     

EXPLORE CASE STUDIES

CASES

Fireproofing an Offshore Giant

Filter by

Products

229 Product Found
My Filters
    Primer-Finish
    Interzone 9545
    A two component, ultra-low VOC, fast curing, hybrid epoxy technology. As a heavy duty epoxy barrier coating formulated for single leg airless spray application Interzone 9545 is designed to provide long term corrosion protection in aggressive offshore environments. Approved to Norsok M-501 System 7A and 7B Interzone 9545 shows excellent corrosion resistance to abrasion and cathodic disbondment.
    Other
    RELEST Wind Leading Edge Cartridge
    RELEST Wind LEP Cartridge is a two-component solvent-free polyurethane coating which is especially designed for protecting the leading edge of rotor blades of wind energy plants from erosion damage caused by rain, sand, hail, dirt and other particles suspended in the air. The coating consists of an exceptionally fast, hard wearing, UV- and abrasion resistant polyurethane elastomer. It is supplied in a convenient 2-component cartridge for direct application of minimal quantities without weighing.
    Preconstruction Primer
    Interplate 408
    A two component iron oxide epoxy shop primer. Approved for welding by Newcastle Primary Care Trust (NOHA). Approved for welding by Lloyd's Register.
    Finish
    Intercryl 530 (Formerly Devcryl 1448)
    A premium quality, low VOC, direct to metal acrylic semi-gloss enamel for high traffic interior - exterior areas of commercial, institutional and industrial structures. *Please note this product is only available in North America.
    Finish
    Interfine 2080HS
    A fast-drying, high performance, high solids isocyanate free and tin free hybrid polysiloxane finish. Interfine 2080HS combines both acrylic and epoxy resin technology to deliver high durability with added flexibility and offers excellent gloss and colour retention when compared to conventional acrylic and polyurethane finishes.  Being isocyanate-free and tin free can help to support the sustainability and HSE objectives of the contract chain - Interfine 2080HS does not produce di-isocyanates during onsite hot-work.
    Surface Pre-Treatment
    Interplus 4101
    A single component, water-based rust remover / cleaner gel. Clean Gel is 100% biologically degradable, free for toxins and conforms to the yellow classification of the Harmonised Offshore Chemical Notification Format (HOCNF).
    Finish
    Devthane 379N
    A low VOC, two component modified acrylic polyurethane finish giving excellent durability and long-term
    recoatability, for use over correctly prepared primed surfaces. This product is also HAPS free and
    exempt solvent free.
    Primer-Finish
    Intergard 452
    Intergard 452 is a two component, high build epoxy intermediate. Pigmented with micaceous iron oxide to comply with the requirements of BS5493:1977
    Surface Tolerant
    Interseal 670HS Temperate
    A low VOC, two component high build, high solids surface tolerant epoxy maintenance coating. For use in temperate and warm environments.
    Other
    Interplus 4102 Odin Gel
    A single component, water-based rust remover / cleaner gel. Interplus 4102 Odin Gel is 100% biologically degradable, free for toxins and conforms to the yellow classification of the Harmonised Offshore Chemical Notification Format (HOCNF).
    Other
    Interseal 3377
    Interseal 3377 is designed to provide excellent short term protection against a wide range of contaminants such as dust, oil, grease, grinding debris, fly rust and coating application overspray whilst providing a degree of resistance to abrasion, grinding debris and scuffing.The dual protective and unique peelable properties of Interseal 3377 make it ideal for use in thosemarket areas where coated substrates require temporary protection against incidentalcontamination and damage, such as that experienced during transit or in a fabrication - assemblyconstruction process.Interseal 3377 can assist in providing a significant reduction in immediate and longer term coatingmaintenance costs whilst improving productivity during assembly and installation.
    Other
    Epoxy Primer 70RS
    Ideal for corrosion protection and maintenance of all types of metal structures, such as warehouses, towers, roofs, shelving, and civil infrastructure works in both outdoor and indoor environments. This product is for industrial use only. Not recommended for immersion.
    Other
    High Temperature 904
    Designed to protect and decorate metal surfaces, such as the exterior of ovens, boilers, chimneys, pipes, machinery, and equipment exposed to temperatures not exceeding 290°C (408.2°F) in dry conditions, in covered environments.
    Other
    Polyamid Epoxy
    Ideal for protecting and decorating structures made of concrete, asbestos-cement, wood, and metal in environments requiring high asepsis, chemical resistance, or exposure to high humidity. It is used in healthcare institutions, food industries, or pharmaceutical products requiring compliance with hygiene standards. Also suitable for the interior of tanks or pipes that store potable water, industrial or wastewater, brine, petroleum derivatives, and weak acidic or alkaline solutions. Prior consultation with an International Technical Advisor is recommended.



    Note that only in indoor environments can this product be used without a topcoat, although it may experience chalking and color changes depending on the type of light or if the concrete moisture exceeds 5%. In outdoor environments, a topcoat is required to prevent discoloration and chalking caused by sunlight.
    Other
    Epoxy Primer 50RS
    Ideal for maintenance protection of all types of metal structures, such as warehouses, towers, roofs, shelving, and civil infrastructure works in both outdoor and indoor environments. This product is for industrial use. Not recommended for galvanized surfaces or immersion.
    1. 1

    Sorry, we couldn't find any results
    Fetching the data, please wait...