We offer a complete coating solution range for the most demanding offshore environments around the world.
Designed specifically for the subsea market, Intertherm 3070 is a two component phenolic epoxy novolac with excellent high temperature resistance and compatibility with cathodic protection.
Ceilcote 282HB Flakeline has excellent resistance to hot flue gas environments. The coating system can achieve a dry film thickness of up to 1350 microns (54 mils) in a single coat with or without the use of a primer. The intent is to eliminate one applic ation step where similar coating systems require two seperate applications. Ceilcote 282HB Flakeline is normally applied on metal surfaces with proper surface preparation. Uses Ceilcote #2 Hardener.
A highly crosslinked, two component, high build epoxy phenolic coating, Intertherm 228HS combines properties of corrosion and chemical resistance when used in high temperature service. Based upon novolac resin technology, Intertherm 228HS can be used in a wide range of highly corrosive environments operating at temperatures up to 230°C (446°F).
A tough, hard wearing, two component, acrylic polysiloxane finish, Interfine 2080 is suitable for both new construction and site maintenance application situations. Interfine 2080 is ideal for areas where high standards of cosmetic appearance and aesthetics are a key requirement, offering superior gloss and color retention and excellent abrasion resistance.
Chartek 1620CSP is a unique, high build intumescent coating that provides combined jet fire protection and cryogenic spill protection (CSP). A solvent-free epoxy, Chartek 1620CSP also provides excellent corrosion protection and blast resistance, and is designed to enhance productivity through fast application and low applied thickness.
A low VOC, two component modified acrylic polyurethane finish giving excellent durability and long-term recoatability, for use over correctly prepared primed surfaces. This product is also HAPS free and exempt solvent free.International Paint also offers Interthane 990V in a mildew resistant, bright white finish. Contact your International Paint representative for additional information.
Interkote 1560 is a cementitious passive fire protection (PFP) coating, ideally suited for onshore facilities where onsite application of cement-based PFP is preferred. Formulated with bauxite, it provides durable, cost-effective fire resistance in accordance with the UL 1709 standard
A high performance, two component, reinforced zinc-rich primer. CHINA ONLY
Interdur 8809 is a two component, metallic zinc rich epoxy primer which complies with the composition and performance requirements of HG/T3668. CHINA ONLY
A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer. Conforms to SSPC Paint 20 Level 3. Available in ASTM D520, Type II zinc dust version as standard.
Coatings & fire protection for upstream oil & gas
Coatings & fire protection for downstream oil & gas
Protecting wind turbines from tip-to-toe