Lining
Interline 961
A two component, solvent based epoxy phenolic tank lining for application to both new steel, or lightly pitted surfaces.
BACK TO PRODUCTS
Onshore Oil and Gas Facilities
Product Applications
Our extensive product range is designed to increase service life and minimize unplanned shutdowns.
Filter by
Products
My Filters
Primer
Interdur 8805
A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer. Conforms to SSPC Paint 20 Level 3. Available in ASTM D520, Type II zinc dust version as standard.
Primer
Intergard 436
A two component clear epoxy sealer.Can be applied to slightly damp concrete. Cures quickly, long pot life. Excellent resistance to most alkalis, solvents, mild acids and water. Good toughness and resilience. Excellent binding properties to weathered fibrous cement sheeting.
Subsea, Abrasion Resistant and Splashzone
Interzone 762
A two component, styrene free, glass flake reinforced ambient cure polyester/acrylic copolymer coating.
Primer
Intergard 2511
A two component, low VOC, high solids, epoxy primer containing zinc phosphate anti-corrosive pigmentation.This primer's versatile application properties provide robust film thickness control as supplied, without the need to thin.
Finish
Interthane1022
A two component acrylic polyurethane finish giving excellent durability and long term recoatability
Other
Enviroline 405HTR MR System
Enviroline 405HTR MR is a reinforced chemcial resistant system. The system features a high temperature reesistant, 100% volume high solids, two component polycyclamine cured lining topcoat. Fibre glass mat reinforcement increases physical properties and where necessary allows dynamic crack bridging in concrete.In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
Structural Concrete- Repair and Protection
Intercrete 4881 (formerly Biodex Sheen Series 2)
A single component, water-based (VOC-free), elastomeric, high build hygiene coating for walls and ceilings in demanding service conditions. Intercrete 4881 is a resin-ric, semi-gloss, biostatic membrane that incorporates the latest encapsulated protectant technology in combination with silver ions to give completely safe use and zero leaching into the surrounding environment. It effectively prevents the growth of mould and bacteria whilst proven silver ion technology has recognised benefits in limiting the spread of germs. The unique in-film chemistry allows for the ultra-slow, controlled release of active ingredients into the coating film throughout a long service life, even where harsh cleaning regimes are followed.
Passive Fire Protection
Chartek 8E
Boron-free Chartek 8E provides exceptional pool fire performance with up to 30% lower installed weight compared to alternative PFP products, allowing for greater flexibility in structural design. It improves coating efficiency through reduced number of coats and no mesh requirement for up to 60 minutes pool fire duration.
Primer
Intercure 1039
A two component epoxy zinc phosphate/micaceous iron oxide primer, formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions.A high solids, low VOC product.
Primer
Interdur 8802
A two component epoxy zinc phosphate/micaceous iron oxide primer, formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions. A high solids, low VOC product. CHINA ONLY
Finish
Intercryl 988
Single pack pure acrylic membrane coating designed to provide high quality cosmetic appearance with protection. It is also the preferred coating for sprayed polyurethane foam and is a long life finish coat over Intergard 436 on fibre cement roofing. Intercryl 988 has high volume solids, exhibits long term resistance to UV and atmospheric pollution and remains permanently flexible and elastic.