Effective corrosion protection against some of the most aggressive chemicals, maximizing in-service time and profitability
With an unrivalled track record spanning more than 20 years, Chartek 7 provides exceptional protection for long duration pool and jet fires, and proven long term corrosion resistance. It is the most widely certified epoxy intumescent in the world and has protected over six million square meters of steel globally
A two component epoxy zinc phosphate/micaceous iron oxide primer, formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions.A high solids, low VOC product.
Intercure 200HS is a fast drying two component, high solids, low VOC, zinc phosphate epoxy primer/intermediate offering excellent barrier protection, low temperature cure and rapid overcoating properties. Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.
A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer offering excellent barrier protection, low temperature cure and rapid overcoating properties.Pigmented with zinc phosphate anti-corrosive pigment to comply with the requirements of BS5493:1977
The rapid curing and overcoating properties of Intercure 420, even under low temperature conditions, provide production flexibility in both new construction and maintenance. Intercure 420 is a high solids, low VOC epoxy MIO coating providing excellent barrier protection in aggressive environments.
A two component, isocyanate-free, high durability acrylic topcoat, Interfine 629 is ideal for existing structures and new construction where a high gloss, weather resistant finish is required to maintain aesthetics. Its low temperature cure down to 2°C (36°F) and fast drying properties help to optimize application time, enable fast handling and increase productivity.
A two component, low VOC, high performance isocyanate-free crosslinking acrylic finish, Interfine 629HS provides high durability in terms of color and gloss retention in a wide variety of aggressive environments. Interfine 629HS is designed for use in both construction and industrial maintenance scenarios.
Interfine 878 is a high performance, two component, isocyanate-free polysiloxane finish offering superior gloss and colour retention, maintaining aesthetics to highest standards. A tough and hard wearing finish, Interfine 878 exhibits good flexibility and abrasion resistance, suitable for both factory new construction and site maintenance application.
Interfine 979 is a patented high durability, two component, isocyanate-free polysiloxane finish, with outstanding color and gloss retention. It is intended for use in areas where the highest standard of cosmetic appearance is required. A tough and hard wearing finish, Interfine 979 displays similar corrosion resistance to a traditional epoxy intermediate.
The fast drying and handling properties of Intergard 251 coupled with extended overcoatability make this an excellent primer for factory application prior to full system application on site. Intergard 251 is a two component anticorrosive zinc phosphate epoxy primer for use in both new construction and industrial maintenance for a wide range of anti-corrosive coatings systems.
Coatings & fire protection for upstream oil & gas
Coatings & fire protection for downstream oil & gas
Linings & corrosion protection in water & waste
Corrosion protection for thermal power plants