Primer
Intergard 1032
A two component epoxy anti-corrosive primer pigmented with zinc phosphate.
BACK TO PRODUCTS
Transportation and Pipeline
Product Applications
Effective corrosion protection against some of the most aggressive chemicals, maximizing in-service time and profitability
Filter by
Products
My Filters
Grout
Ceilcote 748 Corrosion Grout
CEILCOTE 748 Corrosion Grout is a three-component chemicalresistant epoxy grouting material. It provides high strength, good adhesion to concrete and steel, minimal shrinkage and resists degradation by corrosive chemicals.
Primer
Interdur 8805
A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer. Conforms to SSPC Paint 20 Level 3. Available in ASTM D520, Type II zinc dust version as standard.
Finish
Devthane 379
A high performance, two-component chemically-cured aliphatic urethane gloss finish. *Please note this product is only available in North America.
Structural Concrete- Repair and Protection
Intercrete 4804 (formerly Marine Mortar S)
A two component, water-based (VOC-free), fibre reinforced, polymer modified, cementitious mortar with excellent adhesion for use in areas subject to early immersion. Intercrete 4804 cures rapidly to produce a high strength mortar with enhanced polymeric properties for the repair of voids in aggressive marine environments. Suitable for thicknesses up to 50mm.
Primer
Intergard 436
A two component clear epoxy sealer.Can be applied to slightly damp concrete. Cures quickly, long pot life. Excellent resistance to most alkalis, solvents, mild acids and water. Good toughness and resilience. Excellent binding properties to weathered fibrous cement sheeting.
Temperature Resistance
Intertherm 50
A single component, high temperature coating based on a moisture-curing silicone binder, Intertherm 50 is ideal for the protection of steel from corrosion at temperatures up to 540°C (1004°F). The moisture-curing crosslinking technology of Intertherm 50 allows multiple coats to be applied without heat curing.
Lining
Interline 955
A two component, heavy duty vinyl ester coating reinforced with glass flake to increase chemical and abrasion resistance.A chemically resistant, vinyl ester coating which can be applied using standard airless spray equipment at material temperatures up to 35°C (95°F).
Primer
Intergard 2511
A two component, low VOC, high solids, epoxy primer containing zinc phosphate anti-corrosive pigmentation.This primer's versatile application properties provide robust film thickness control as supplied, without the need to thin.
Chemical Resistant Lining
Ceilcote 140 Flakeline
Ceilcote 140 Flakeline is a heavy duty, glass flake reinforced, chemically resistant vinyl ester lining for protection of steel against aggressive chemicals in immersion service. Uses Ceilcote #2 Hardener.
Temperature Resistance
Intertherm 228HS
A highly crosslinked, two component, high build epoxy phenolic coating, Intertherm 228HS combines properties of corrosion and chemical resistance when used in high temperature service. Based upon novolac resin technology, Intertherm 228HS can be used in a wide range of highly corrosive environments operating at temperatures up to 230°C (446°F).
Intermediate
Interdur 8842
A two component, high solids, low VOC epoxy micaceous iron oxide coating formulated on proprietary polymer technology which provides rapid cure and overcoating even under low temperature conditions.
Structural Concrete- Repair and Protection
Intercrete 4874 (formerly Cemprotec 2000-BJT)
A high performance butyl tape which is designed to join two pieces of Intercrete 4872 waterproof composite tape together. Embedded into our Intercrete range of cementitious coatings, it forms an elastomeric joint between two lengths of tape to accommodate movement.
Chemical Resistant Lining
Ceilcote 800 Coroline
CEILCOTE 800 Coroline lining is a heavy duty, monolithic flooring/lining system that is designed to protect concrete and metal against attack by corrosive chemicals and mechanical abuse. Based on novolac epoxy technology, CEILCOTE 800 Coroline lining provides exceptional resistance to 98% Sulfuric Acid, Sodium Hydroxide and other aggressive chemicals.