Effective corrosion protection against some of the most aggressive chemicals, maximizing in-service time and profitability
A two component, high temperature resistant topcoat based on inorganic silicate technology.
A single component, high temperature coating based on a moisture-curing silicone binder, Intertherm 50 is ideal for the protection of steel from corrosion at temperatures up to 540°C (1004°F). The moisture-curing crosslinking technology of Intertherm 50 allows multiple coats to be applied without heat curing.
A single component, temperature resistant finish coating, Intertherm 875 is based on silicone and acrylic resins with thermally stable pigmentation. Intertherm 875 does not require heating between coats and it is suitable for steelwork operating at temperatures up to 260°C (500°F) in a wide range of industrial environments.
A two component, metallic zinc rich epoxy primer formulated to provide fast drying, rapid handling properties and excellent abrasion resistance.
A low VOC, inorganic zinc-rich ethyl silicate based primer providing outstanding corrosion protection for properly prepared steel surfaces. Contains 82% zinc dust in the dry film for long term corrosion protection.
A two component high solids, low VOC metallic zinc-rich epoxy primer formulated on proprietary polymer technology which provides rapid cure and overcoating even under low temperature conditions.Interzinc 315 uses zinc dust conforming to the requirements of ASTM D520 Type II as a minimum standard.
Interzinc 42 is a high quality general purpose two component epoxy zinc primer designed for use in maintenance and new construction. Containing 50% zinc, Interzinc 42 is recommended as part of an anticorrosive coating system for structures in a wide range of industries
Containing 80% zinc, Interzinc 52 is a high performance two component zinc-rich epoxy primer with excellent application properties. Interzinc 52 complies with SSPC Paint 20 Level 2 and has been designed to provide maximum protection as part of an anticorrosive coating system for steel in aggressive environments in both maintenance and new construction situations
A two component, low VOC, water borne alkali metallic zinc silicate primer.
A two component, metallic zinc rich epoxy primer, designed to provide excellent corrosion resistance both as a single coat and as a primer for a high performance coating system. Contains 90% zinc by weight in the dry film.
Coatings & fire protection for upstream oil & gas
Coatings & fire protection for downstream oil & gas
Linings & corrosion protection in water & waste
Corrosion protection for thermal power plants