BACK TO PRODUCTS

Wind Power

Product Applications

We are a single source supplier of coatings for wind turbines - from tip to toe.

CASES

Essential Protection - London Wind Array

Filter by

Products

131 Product Found
My Filters
    Primer
    Interdur 8805
    A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer. Conforms to SSPC Paint 20 Level 3. Available in ASTM D520, Type II zinc dust version as standard.
    Temperature Resistance
    Intertherm 228HS
    A highly crosslinked, two component, high build epoxy phenolic coating, Intertherm 228HS combines properties of corrosion and chemical resistance when used in high temperature service. Based upon novolac resin technology, Intertherm 228HS can be used in a wide range of highly corrosive environments operating at temperatures up to 230°C (446°F).
    Intermediate
    Interdur 8842
    A two component, high solids, low VOC epoxy micaceous iron oxide coating formulated on proprietary polymer technology which provides rapid cure and overcoating even under low temperature conditions.
    Passive Fire Protection
    Chartek 8E
    Boron-free Chartek 8E provides exceptional pool fire performance with up to 30% lower installed weight compared to alternative PFP products, allowing for greater flexibility in structural design. It improves coating efficiency through reduced number of coats and no mesh requirement for up to 60 minutes pool fire duration.
    Passive Fire Protection
    Chartek 1960 CSP
    Chartek 1960CSP intumescent material combined hydrocarbon fire protection and insulation against cryogenic liquid exposure.
    Topcoat
    RELEST Wind HS Topcoat - I306-xxxx
    RELEST Wind HS Topcoat is a matt waterborne 2K acrylic polyurethane topcoat for use as a finishing coat on rotor blades. It offers quick drying for fast overcoating, even at high film thicknesses without the risk of blistering. It is suited for roller and spray applciaiton. RELEST Wind HS Topcoat has excellent UV and weathering resistance properties for long term protection and performance.
    Primer
    Interdur 8802
    A two component epoxy zinc phosphate/micaceous iron oxide primer, formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions. A high solids, low VOC product. CHINA ONLY
    Lining
    Enviroline 405HTR
    Enviroline 405HTR offers high temperature performance alongside a wide ranging chemical resistance, for increased operational flexibility. Formulated with innovative polycyclamine technology, Enviroline 405HTR is a low VOC novolac epoxy lining that allows rapid return to service in just 14 hours, minimizing process disruption and reducing overall installation costs. Enviroline 405HTR offers high temperature resistance to 150°C (302°F) in a variety of cargoes including crude oil and produced water.
    Primer
    Interdur 8816
    A two component, metallic zinc rich epoxy primer, which complies with the composition requirements of Chinese Chemical Industrial Standard HG/T3668.
    Finish
    Interthane 990V
    A low VOC, two component modified acrylic polyurethane finish giving excellent durability and long-term recoatability, for use over correctly prepared primed surfaces. This product is also HAPS free and exempt solvent free.International Paint also offers Interthane 990V in a mildew resistant, bright white finish. Contact your International Paint representative for additional information.
    Primer
    Interdur 8803
    A high performance, two component, reinforced zinc-rich primer. CHINA ONLY
    Primer
    Interdur 8808
    A two component, metallic zinc rich epoxy primer which complies with the composition and performance requirements of SSPC Paint 20 and HG/T3668, designed to give fast cure at low temperatures. CHINA ONLY
    Intermediate
    Interdur 8840
    A low VOC, high solids, high build, two component epoxy coating. Available with conventional pigmentation, or alternatively can be pigmented with micaceous iron oxide to provide enhanced overcoating properties. CHINA ONLY
    Finish
    Devlac 1432
    A quick dry, corrosion resistant gloss enamel specially formulated for finishing metal products. *Please note this product is only available in North America.
    Primer
    Intergard 3210
    A two component, low VOC, high solids, fast curing epoxy primer for increased productivity pigmented with zinc phosphate to provide added anti-corrosive performance.
    1. 1

    Sorry, we couldn't find any results
    Fetching the data, please wait...