BACK TO PRODUCTS

Filter by

Products

539 Product Found
My Filters
    Primer
    Interbuild 1002
    Interbuild 1002 is a high performance, two component epoxy primer with excellent chemical and abrasion resistance. It exhibits good penetration properties to ensure good adhesion on concrete floors. Interbuild 1002 is especially suited for properly prepared concrete substrates.
    Primer
    Interbond 600
    A two component, surface tolerant, high solids, clear epoxy sealer.
    Other
    Ceilcote 6640 Ceilcrete System
    Filler
    RELEST Wind Putty Contour - I373-3615
    RELEST Wind Putty Contour 3K is a Solvent-free, highly viscous polyurethane putty for smoothing surface and contour irregularities. Its easy sanding and rapid cure properties offers increased productivity for further processing and recoating. RELEST Wind Putty Contour is ideally situated for manual application.
    Topcoat
    RELEST Wind HS Topcoat - I306-xxxx
    RELEST Wind HS Topcoat is a matt waterborne 2K acrylic polyurethane topcoat for use as a finishing coat on rotor blades. It offers quick drying for fast overcoating, even at high film thicknesses without the risk of blistering. It is suited for roller and spray applciaiton. RELEST Wind HS Topcoat has excellent UV and weathering resistance properties for long term protection and performance.
    Primer
    Intergard 361
    A two pack, low temperature cure, epoxy universal primer which can be overcoated with various finish coats such as polyurethane, epoxy and alkyd finishes after extended periods, without the use of a tie coat. It is also used as a primer over galvanised steel and stainless steel.
    Primer
    Intershield 300V
    A light coloured, abrasion resistant, aluminium pure epoxy coating giving excellent long term anticorrosive protection and low temperature application capability.
    Temperature Resistance
    Intertherm 891
    A one component, general purpose heat resistant paint, based on air drying oleoresinous resins, and pigmented with aluminium flake.
    Finish
    Interbuild 1003
    Interbuild 1003 is a high performance, two component epoxy primer with excellent chemical and abrasion resistance properties. Interbuild 1003 is especially suited for mechanically prepared concrete substrates or porous substrates that prone to weakness, due to excellent penetration and high adhesion properties.
    Other
    RELEST Wind Gelcoat - I372-7235
    RELEST Wind Gelcoat ca. RAL 7035, RA is a solvent free 2k viscoplastic, polyaspartic coating with excellent abrasion resistance. Suitable as part of a coating system for UV- and weather- resistance. Film thicknesses of approximately 200μm can be achieved in one step with optimal flow properties. RELEST Wind Gelcoat ca. RAL 7035, RA is characterised by its great adhesion to epoxy laminate.
    Lining
    Enviroline 376F-30LT
    Low Temperature Application and Cure Tank Lining.
    Surface Tolerant
    RELEST Wind Putty Porefiller - I372-5915
    RELEST Wind Putty Porefiller is a 2K polyurethane for filling medium pinholes. UV- and weather- resistant with very fast drying properties and long workable life. It is compatible with all RELEST coating systems and can be recoated without sanding.
    Preconstruction Primer
    Interplate 855
    A two pack, zinc silicate shop (pre-construction) primer providing good corrosion protection even after heating up to 800°C (1472°F) and resistance to damage caused by welding, gas cutting and fairing. Suitable for fast welding processes and offers control of secondary surface preparation requirements.
    Pipe Lining
    Intergard 2272
    A low VOC, two component, high solids epoxy anti-corrosive flow coat.
    Topcoat
    RELEST Wind WB Topcoat LI - I394-x8xx
    RELEST Wind WB Topcoat LI is a waterborne 2K acrylic polyurethane topcoat for use as a finishing coat on rotor blades. It is fast drying and allows for rapid recoating even at high film thicknesses without the risk of blistering. RELEST Wind WB Topcoat LI offers excellent UV and weathering resistance.
    1. 1

    Sorry, we couldn't find any results
    Fetching the data, please wait...