Effective corrosion protection against some of the most aggressive chemicals, maximizing in-service time and profitability
A single component, zinc rich inorganic silicate primer, giving exceptional cathodic protection together with ease of use and application.
A single component, water based paint disbonder designed to remove coating residues from metallic substrates.Can be described as readily biodegradable as tested by OECD 301B CO2 Evolution test.
A solvent free, two component, high build, surface tolerant epoxy coating capable of being applied as a single or multi-coat system over abrasive blasted, hydroblasted or mechanically prepared steel surfaces.
A three component, metallic, zinc rich epoxy primer which passes Slip B coefficient. Interzinc 315B complies with SSPC Paint 20 and contains minimum 80% zinc in the dry film.The zinc dust used in Interzinc 315B conforms to ASTM D520, Type II.
A two component epoxy anti-corrosive primer pigmented with zinc phosphate.
A two component, high solids, low VOC epoxy micaceous iron oxide coating formulated on proprietary polymer technology which provides rapid cure and overcoating even under low temperature conditions.
Ceilcote 680 Primer is a low viscosity epoxy primer for steel and concrete, with low temperature cure and a degree of tolerance to surface moisture.
Part of the Interzinc 22 series of products.A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer. Conforms to SSPC Paint 20 Level 2Available in ASTM D520, Type II zinc dust version as standard.
A two component, metallic zinc rich epoxy which complies with the compositional requirements of SSPC Paint 20 Level 3.
A two component, glass flake reinforced ambient cure isophthalic polyester coating.
Coatings & fire protection for upstream oil & gas
Coatings & fire protection for downstream oil & gas
Linings & corrosion protection in water & waste
Corrosion protection for thermal power plants