Effective corrosion protection against some of the most aggressive chemicals, maximizing in-service time and profitability
Designed as a one coat render for spray or trowel application on external and Internal walls as described in EN988-1. Intercrete 4823 is fibre reinforced to provide excellent tensile strength, impact strength and the ability to resist cracking. The dense matrix provides excellent protection from the ingress of acid gases, moisture and chlorides. Can be applied at thicknesses from 5-50mm in a single coat which greatly reduces application costs. Highly waterproof resisting 7 bar hydrostatic pressure on both the positive and negative side when applied at 10mm thickness. Conforms to the requirements of BS 8102:2009, the Code of Practice for Protection of Structures Against Water from the Ground, providing the optimum ‘Grade 3’ completely dry environment.
For the filling of blow holes and small surface defects in precast and in-situ concrete to produce an aesthetic durable finish. Suitable for repair methods 3.1 as defined by BS EN 1504-3. Fine grade, polymer modified mortar for filling blow holes and minor surface defects. Available in Grey and White versions to enable colour matching with the parent concrete. CE-marked in accordance with BS EN 1504-3 Class R1. Suitable for repair methods 3.1 as defined by BS EN 1504-3.
A uniquely formulated cementitious material for sealing the surface gap at the interlock or clutch between piles prior to the application of a Intercrete cementitious anti-corrosion coating. Materials are pre-packaged in a convenient and easy to handle size, requiring only mixing on site. A unique blend of surfactants enables easy application with a pointing gun. Gel structure breaks down under shear to ensure complete filling.
Intercrete 4844 is self-priming, hydrates to provide an alkaline environment which chemically reacts with the substrate to accelerate the re-passivation of steel, providing excellent adhesion to steel and is tolerant to lower levels of steel preparation, including chloride contamination.
A single component, water-based (VOC free), rapid curing, acrylic copolymer modified with a unique water-emulsified epoxy cross-linking agent and siloxane emulsion. Intercrete 4816 is inherently hydrophobic and alkali resistant, making it ideal for application to a wide range of new and aged mineral substrates.It is non-hazardous, and application is by brush, roller or airless spray to prime and stabilise surfaces prior to the application of Intercrete specialist membranes. Intercrete 4816 cures to form a clear film with an identifying green tint, both on and within the substrate, to provide an ideal surface for subsequent treatment.
Designed as a versatile, two component cementitious coating / wearing screed for levelling and waterproofing tamped or uneven concrete floors, or floors with no waterproofing membrane. Intercrete 4853 can be used as a waterproof cementitious coating, an underlayment or as a wearing screed to provide resistance to abrasion and trafficking, including level and sloping substrates and ramps.
Can be applied in thicknesses ranging from 0 - 60mm Suitable for application to saturated substrates, or floors with no waterproofing membrane, without risk of blistering.
Specifically designed for rapid cosmetic repairs to in-situ and pre-cast concrete where repairs need to be colour matched to the parent concrete to provide a highly aesthetic finish. Intercrete 4808 demonstrates rapid strength development, achieving over 9MPa in 2 hours. Ultimate physical properties of cured materials are similar to base concrete.Not suitable for repairs deeper than 25mm. CE-marked in accordance with BS EN 1504-3 Class R1. Suitable for repair methods 3.1 as defined by BS EN 1504-3.
Designed for use in the rail industry as a one coat direct-to-metal exterior finish or a primer for approved topcoats; Intergard 3500 has excellent edge retentive properties and provides a combination of anti-corrosive barrier protection and abrasion, chemical fume and spillage resistance. Intergard 3500 is formulated with ultra high solids, providing an option where regulations or customer preference require low VOCs and zero HAPs coatings
Ceilcote 242HT Flakeline is a glass flake filled, catalyzed vinyl ester system with excellent resistance to organic and inorganic acid solutions and many aliphatic solvents.
A high solids, one coat, chemical resistant, epoxy novolac, lining system with exceptional resistance to a wide variaety of chemicals and solvents
Coatings & fire protection for upstream oil & gas
Coatings & fire protection for downstream oil & gas
Linings & corrosion protection in water & waste
Corrosion protection for thermal power plants