BACK TO PRODUCTS

Transportation and Pipeline

Product Applications

Effective corrosion protection against some of the most aggressive chemicals, maximizing in-service time and profitability

CASES

Optimized Capacity with Interline 984

Filter by

Products

247 Product Found
My Filters
    Primer
    Intergard 361
    A two pack, low temperature cure, epoxy universal primer which can be overcoated with various finish coats such as polyurethane, epoxy and alkyd finishes after extended periods, without the use of a tie coat. It is also used as a primer over galvanised steel and stainless steel.
    Other
    RELEST Wind Gelcoat - I372-7235
    RELEST Wind Gelcoat ca. RAL 7035, RA is a solvent free 2k viscoplastic, polyaspartic coating with excellent abrasion resistance. Suitable as part of a coating system for UV- and weather- resistance. Film thicknesses of approximately 200μm can be achieved in one step with optimal flow properties. RELEST Wind Gelcoat ca. RAL 7035, RA is characterised by its great adhesion to epoxy laminate.
    Surface Tolerant
    Interseal 670HS Low Temperature
    A low VOC, two component high build, high solids surface tolerant epoxy maintenance coating.Specially designed with an enhanced curing profile to maximise productivity in cold conditions
    Primer-Finish
    Intergard 3500
    Designed for use in the rail industry as a one coat direct-to-metal exterior finish or a primer for approved topcoats; Intergard 3500 has excellent edge retentive properties and provides a combination of anti-corrosive barrier protection and abrasion, chemical fume and spillage resistance. Intergard 3500 is formulated with ultra high solids, providing an option where regulations or customer preference require low VOCs and zero HAPs coatings
    Other
    RELEST Wind Leading Edge Cartridge
    RELEST Wind LEP Cartridge is a two-component solvent-free polyurethane coating which is especially designed for protecting the leading edge of rotor blades of wind energy plants from erosion damage caused by rain, sand, hail, dirt and other particles suspended in the air. The coating consists of an exceptionally fast, hard wearing, UV- and abrasion resistant polyurethane elastomer. It is supplied in a convenient 2-component cartridge for direct application of minimal quantities without weighing.
    Finish
    Intercryl 530 (Formerly Devcryl 1448)
    A premium quality, low VOC, direct to metal acrylic semi-gloss enamel for high traffic interior - exterior areas of commercial, institutional and industrial structures. *Please note this product is only available in North America.
    Finish
    Devthane 379N
    A low VOC, two component modified acrylic polyurethane finish giving excellent durability and long-term
    recoatability, for use over correctly prepared primed surfaces. This product is also HAPS free and
    exempt solvent free.
    Primer-Finish
    Intergard 452
    Intergard 452 is a two component, high build epoxy intermediate. Pigmented with micaceous iron oxide to comply with the requirements of BS5493:1977
    Surface Tolerant
    Interseal 670HS Temperate
    A low VOC, two component high build, high solids surface tolerant epoxy maintenance coating. For use in temperate and warm environments.
    Other
    Interbuild 1081
    Interbuild 1081 is a pigmented, solvent free, self-smoothing, Epoxy overlay system designed to provide seamless protection of Concrete substrates from 2mm to 5mm. Interbuild 1081 will provide a gloss finish with excellent wear characteristics and abrasion resistance, high levels of chemical resistance and an easy to clean smooth finish.
    Other
    Interplus 4102 Odin Gel
    A single component, water-based rust remover / cleaner gel. Interplus 4102 Odin Gel is 100% biologically degradable, free for toxins and conforms to the yellow classification of the Harmonised Offshore Chemical Notification Format (HOCNF).
    Other
    Interseal 3377
    Interseal 3377 is designed to provide excellent short term protection against a wide range of contaminants such as dust, oil, grease, grinding debris, fly rust and coating application overspray whilst providing a degree of resistance to abrasion, grinding debris and scuffing.The dual protective and unique peelable properties of Interseal 3377 make it ideal for use in thosemarket areas where coated substrates require temporary protection against incidentalcontamination and damage, such as that experienced during transit or in a fabrication - assemblyconstruction process.Interseal 3377 can assist in providing a significant reduction in immediate and longer term coatingmaintenance costs whilst improving productivity during assembly and installation.
    Other
    Epoxy Primer 70RS
    Ideal for corrosion protection and maintenance of all types of metal structures, such as warehouses, towers, roofs, shelving, and civil infrastructure works in both outdoor and indoor environments. This product is for industrial use only. Not recommended for immersion.
    Other
    High Temperature 904
    Designed to protect and decorate metal surfaces, such as the exterior of ovens, boilers, chimneys, pipes, machinery, and equipment exposed to temperatures not exceeding 290°C (408.2°F) in dry conditions, in covered environments.
    Other
    Polyamid Epoxy
    Ideal for protecting and decorating structures made of concrete, asbestos-cement, wood, and metal in environments requiring high asepsis, chemical resistance, or exposure to high humidity. It is used in healthcare institutions, food industries, or pharmaceutical products requiring compliance with hygiene standards. Also suitable for the interior of tanks or pipes that store potable water, industrial or wastewater, brine, petroleum derivatives, and weak acidic or alkaline solutions. Prior consultation with an International Technical Advisor is recommended.



    Note that only in indoor environments can this product be used without a topcoat, although it may experience chalking and color changes depending on the type of light or if the concrete moisture exceeds 5%. In outdoor environments, a topcoat is required to prevent discoloration and chalking caused by sunlight.
    1. 1

    Sorry, we couldn't find any results
    Fetching the data, please wait...