Effective corrosion protection against some of the most aggressive chemicals, maximizing in-service time and profitability
A solvent free, two component polycyclamine cured girth weld coating system utilising advanced epoxy novolac technology.
Part of the Interzinc 22 series, Interzinc 2280 is a two component, solvent-based silicate inorganic zinc-rich primer (80%) suitable for use with a wide range of high performance anticorrosive systems and topcoats in both maintenance and new construction. With rapid recoat and curing properties, Interzinc 2280 is capable of application in a wide range of climatic conditions and it conforms to SSPC Paint 20 Level 2 and ASTM D20 D520 Type II.
Containing 85% zinc, Interzinc 22 is an ideal zinc-rich silicate primer for steel in aggressive, corrosive environments. Rapid recoat technology allows faster throughput of coated steel, greatly enhancing productivity. Interzinc 22 conforms to SSPC Paint 20 Level 1 and ASTM D20 D520 Type II and can also be used as a tank lining for the carriage of different chemical cargoes.
A high performance, two component, fluorocarbon finish which affords extended lifetime to first maintenance when utilised as part of a high performance anti-corrosive system. Interfine 3399 offers superior gloss and colour retention and provides significantly improved resistance to yellowing and chalking when compared to typical conventional topcoats including catalysed acrylic, and polyurethane finishes.
A low VOC, high solids, rapid cure primer/finish, Intercure 4500 offers excellent anticorrosive protection and long term aesthetic durability. Based upon innovative polyaspartic resin technology, Intercure 4500 can be applied as a single coat direct-to-metal or over suitable primers for more corrosive environments using standard application equipment. Its rapid cure characteristics (even at low temperatures) help to further optimize application time and reduce labor costs.
A two component solvent free elastomeric urethane. A chemically resistant elastomeric urethane which can be applied by heated, twin-feed airless spray.
Interchar 2060 provides 60 minutes fire protection via single coat application while maintaining architectural aesthetics. It is a class leading single component, low VOC intumescent coating suitable for onsite and offsite application. Tested and certified to the highest standards, Interchar 2060 offers rapid drying times for fast handling and throughput.
A two component acrylic polyurethane finish giving excellent durability and long term recoatability.
A high solids, abrasion resistant, aluminum pigmented pure epoxy coating, Intershield 300HS provides excellent long term anticorrosive protection and low temperature cure capability. Intershield 300HS is a universal primer that can also be used as a ballast tank coating
Ceilcote 282HB Flakeline has excellent resistance to hot flue gas environments. The coating system can achieve a dry film thickness of up to 1350 microns (54 mils) in a single coat with or without the use of a primer. The intent is to eliminate one applic ation step where similar coating systems require two seperate applications. Ceilcote 282HB Flakeline is normally applied on metal surfaces with proper surface preparation. Uses Ceilcote #2 Hardener.
Coatings & fire protection for upstream oil & gas
Coatings & fire protection for downstream oil & gas
Linings & corrosion protection in water & waste
Corrosion protection for thermal power plants